- Name
- MultiSensor 8
- Brand
- Aeotec
- Texts
- ID Description Value 8
- Features
- Feature Values Battery Quantity
- Documents
- Category File Manual_English
- Role type
- ROLE_TYPE_END_NODE_ALWAYS_ON, ROLE_TYPE_END_NODE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors
- Identifier
- ZWA066-A
- Product id
- 0x0042
- S2 classes
- S2_AUTHENTICATED, S2_UNAUTHENTICATED
- Brand owner
- Aeotec Limited
- Description
- Aeotec MultiSensor 8 adopts Z-Wave® technology and is an intelligent wireless sensor device that integrates motion, temperature, humidity, light and acceleration sensors. The product supports battery or USB power supply. The installation methods include ceiling installation and wall mounted installation, and the sensitivity of motion sensor is also adjustable. This product supports Security 2 Command Class. While a Security S2 enabled Controller is needed in order to fully use the security feature. This product can be operated in any Z-Wave network with other Z-Wave/ Z-Wave Plus® certified devices from other manufacturers. All mains operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. This product also supports SmartStart.
- Device type
- Notification Sensor DT
- Oem version
- HW: 66 FW: 01.00
- Product url
- www.aeotec.com
- Library type
- END_NODE_ENHANCED_232
- Product line
- Z-Wave Plus v2 line
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 7.23.2
- Frequency plans
- US: 916.00MHz, 908.40MHz, US_LR: 912.00MHz, 920.00MHz
- Manufacturer id
- 0x0371
- Product type id
- 0x0102
- Hardware platform
- EFR32ZG23A
- Short description
- Aeotec MultiSensor 8
- Countries / regions
- Argentina, Bahamas, Barbados, Bermuda, Bolivia, British Virgin Islands, Canada, Cayman Islands, Colombia, Guatemala, Haiti, Honduras, Jamaica, Mexico, Panama, Saint Kitts and Nevis, Suriname, Trinidad and Tobago, Turks and Caicos Islands, United States of America
- Supports smart start
- Yes
- Certification number
- ZC14-26030587
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value 1
- Supports explorer frames
- Yes
- Radio range z wave lr (m)
- 400
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SENSOR_BINARY_V2
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Supported notification types
- Notification Type Event / State Heat Alarm
- Value 2 battery type value cr123 a color value white firmware updatable value updatable by consumer by rf association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile 1
