- Name
- Tag Reader 500
- Brand
- BeNeXt B.V.
- Features
- Feature Values Battery Quantity
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x2000
- Categories
- Locks, Security Add-Ons
- Product id
- 0x0200
- Device type
- Other
- Oem version
- HW: 20 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x2000
- Z wave version
- 6.61.00
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x008A
- Product type id
- 0x0007
- Long description
- A Z-Wave security enabled entry control device. You can arm/disarm your house to home or away with the Tag Reader 500. With the use of a RFID tag or a numerical code the device can send an entry control message which can be handled by a supported gateway. In addition the Tag Reader supports the activation of scenes.
- Hardware platform
- ZM5101
- Short description
- A Tag Reader that bridges a RFID TAG to a Z-Wave message. In addition the Tag Reader has a numerical keypad which can be used to changes lifestyles or activate scenes.
- Product identifier
- 80820701
- Countries / regions
- European Union
- Certification number
- ZC10-16105254
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Value 2 battery type value aa color value white firmware updatable value updatable by consumer by rf association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 default all 1 1 default all 8 gateway confirmation in gateway mode it is possible to let the gateway decide if the tag reader can arm to home or away. if gateway indication is disabled the tag reader automatically assumes that it can arm and will wait for a user input of rfid tag or numeric code. value 0x00: gateway confirmation disabled value 0x01 – 0x ff: gateway confirmation enabled 0 1 0 0 0 from to description 0 0 gateway confirmation disabled 1 1 gateway confirmation enabled 3 feedback timeout to configure the timeout to wait for a wakeup no more information before the error beep is automatically sound. the error beeps are fixed 8 beeps shortly after each other. value 0x00 means disable. value between 0x01 and 0x ff is the time in seconds 0 1 0 0 0 from to description 0 0 disable 2 2 2 seconds 4 feedback beeps per second to configure the number of beeps per second. every beep is fixed about 10ms. value between 0x00 and 0x ff are number of beeps per second 0 1 0 0 2 from to description 2 2 2 beeps per second 8 8 8 beeps per seconds 5 always awake mode to configure the always awake mode. value 3: set to always awake mode value any other then 3: set to normal operation mode 0 1 0 0 1 from to description 1 1 normal operation mode 3 3 always awake mode 7 operation mode the mode that the tag reader communicates with the associated gateway. value 0x00: the rfid and numeric codes are reported in gateway mode value 0x01 – 0x ff: the rfid and numeric codes are reported in local mode 0 1 0 0 0 from to description 0 0 gateway mode 1 1 local mode texts
