- Name
- SHP-DP620MK
- Brand
- SAMSUNG SDS
- Features
- Feature Values Battery Quantity
- Is flirs
- Yes
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_LISTENING
- User icon
- 0x0300
- Categories
- Locks
- Product id
- 0x0001
- Device type
- Door Lock - Keypad
- Oem version
- HW: 1 FW: 1.03
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0300
- Z wave version
- 6.51.06
- Frequency plans
- KR: 920.90MHz, 921.70MHz, 923.10MHz
- Manufacturer id
- 0x022E
- Product type id
- 0x0001
- Long description
- Touch Screen Type Push Pull Door Lock. The Samsung SDS Z-Wave Door Lock is a security enabled Z-Wave Plus product that is able to use encrypted Z-Wave Plus messages to communicate to other security enable Z-Wave Plus products.
- Hardware platform
- ZM5101
- Short description
- Samsung Push Pull Door Lock / Black
- Product identifier
- SHP-DP620MK
- Countries / regions
- Republic of Korea
- Certification number
- ZC10-16105293
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Value 4 battery type value aa color value gray door lock type value lever handle association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 1 enable 0 0 disable (default) 1 security function this value can be used when the device is connected with platform of samsung sds. this function is not related to z wave cc. 0x02 : command for disable which is set by platform of samsung sds. after setting, if you try to get value of security function , '0x00' will be reported. 0x03 : command for enable which is set by platform of samsung sds. after setting, if you try to get value of security function, '0x01' will be reported. 0x04 : 'request for enable' command which is reported by doorlock. this cannot be set. (8th function in manual) 0x05 : if the request for 'request for enable' command is failed in platform, this will be set by platform of samsung sds. value of security function is not changed by this command. 0 1 0 0 0 from to description 4 4 request for enable 5 5 fail 0 0 disable (default) 1 1 enable 2 2 system disable 3 3 system enable texts
- ID Description Value 1