- Name
- Door/ Window Sensor 6
- Brand
- Aeotec
- Features
- Feature Values Supported Notification Types
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C06
- Categories
- Sensors
- Product id
- 0x0070
- Device type
- Notification Sensor
- Oem version
- HW: 112 FW: 1.03
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0C06
- Z wave version
- 6.51.09
- Frequency plans
- HK: 919.80MHz, 919.80MHz
- Manufacturer id
- 0x0086
- Product type id
- 0x0302
- Long description
- Aeon Labs Door/ Window Sensor 6 is a smart Z-Wave sensor that can detect the status of door/window's open/close in real time. It’s a security Z-Wave device that supports security encryption. Also it supports the “Over the Air Firmware Updating” that allows you wirelessly update its firmware if needs. It can be included and operated in any Z-Wave network with other Z-Wave certified devices from manufacturers and/or other applications.
- Hardware platform
- ZM5101
- Short description
- Aeon Labs Door/ Window Sensor 6 is a smart Z-Wave sensor that can detect the status of door/window's open/close in real time.
- Product identifier
- ZW112-D
- Countries / regions
- Hong Kong
- Certification number
- ZC10-17085746
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 101
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SENSOR_BINARY
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type General purpose
- Supported notification types
- Notification Type Event / State Access Control
- Value access control sensors value open/closed (binary) association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 disable. 1 1 enable. 1 which value of the sensor binary report or basic set will be sent when the door is opened/closed. to set which value of the sensor binary report or basic set will be sent when the door is opened/closed. 0 1 0 0 1 from to description 0 0 sensor binary report/basic set =0x ff when the door is opened, sensor binary report/basic set= 0x00 when the door is closed. 1 1 sensor binary report/basic set= 0x00 when the door is opened, sensor binary report/basic set=0x ff when the door is closed. 111 set the interval time of low battery checking. set the interval time of low battery checking. note: 1, if the value is less than 10, the time unit is second. if the value is more than 10, the time unit is 4 minutes, which means if the value is more than 10 and less than 240, the interval time is 4 minutes. if the value is more than 240 and less than 480, the interval is 8 minutes. 2, if the current battery report falls below the low battery value (configurable parameter 39), it will send battery report=0x ff. 0 4 0 0 86640 from to description 0 2147483647 the range of interval can be set to 0 to 2147483647. 121 to configure which sensor report will be sent when the door is opened/closed. to configure which sensor report will be sent when the door is opened/closed. 0 1 0 0 1 from to description 1 1 basic set cc is selected. 2 2 sensor binary report cc is selected. 3 3 basic set cc and sensor binary report cc are selected. 252 lock/unlock all configuration parameters. lock/unlock all configuration parameters. 0 1 0 0 0 from to description 0 0 unlock. 1 1 lock. 255 reset the sensor. reset the sensor. 0 4 0 0 0 from to description 0 0 reset to default settings. 1431655765 1431655765 reset to default settings and excluded from the network. texts
