- Name
- Door/ Window Sensor Gen5
- Brand
- Aeotec
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- Categories
- Sensors
- Product id
- 0x0078
- Device type
- Notification Sensor
- Oem version
- HW: 78 FW: 1.05
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Z wave version
- 6.51.06
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0086
- Product type id
- 0x0102
- Long description
- Aeon Labs Door/ Window Sensor Gen5 is a smart Z-Wave sensor that can detect the status of door/window's open/close in real time. It’s a security Z-Wave device that supports security encryption. Also it supports the “Over the Air Firmware Updating” that allows you wirelessly update its firmware if needs. It can be included and operated in any Z-Wave network with other Z-Wave certified devices from manufacturers and/or other applications.
- Hardware platform
- ZM5202
- Short description
- Aeon Labs Door/ Window Sensor Gen5 is a smart Z-Wave sensor that can detect the status of door/window's open/close in real time.
- Association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- Product identifier
- ZW120-A
- Countries / regions
- United States of America
- Certification number
- ZC10-15110015
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- From to description 0 0 sensor binary report =0x ff when the door is closed, sensor binary report= 0x00 when the door is opened. 1 1 sensor binary report= 0x00 when the door is closed, sensor binary report=0x ff when the door is opened. 2 enable/disable wake up 10 minutes when re power on the sensor. enable/disable wake up 10 minutes when re power on the sensor. 0 1 0 0 1 from to description 0 0 disable. 1 1 enable. 3 which value of the basic set will be sent when the door is opened/closed. to set which value of the basic set will be sent when the door is opened/closed. 0 1 0 0 1 from to description 0 0 basic set=0x ff when the door is closed, basic set=0x00 when the door is opened. 1 1 basic set 0x00 when the door is closed, basic set= 0x ff when the door is opened. 111 set the interval time of battery report. set the interval time of battery report. note: 1, if the value is less than 10, the time unit is second. if the value is more than 10, the time unit is 4 minutes, which means if the value is more than 10 and less than 240, the interval time is 4 minutes. if the value is more than 240 and less than 480, the interval is 8 minutes. 2, if the current battery report falls below the low battery value (configurable parameter 39), it will send battery report=0x ff. 0 4 0 0 0 from to description 0 2147483647 the range of interval can be set to 0 to 2147483647. 255 reset the sensor. reset the sensor. 0 4 0 0 0 from to description 0 0 reset to default settings. 1431655765 1431655765 reset to default settings and excluded from the network. texts
