- Name
- Door/Window Sensor 7
- Brand
- Aeotec
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C06
- Categories
- Sensors
- Product id
- 0x0007
- S2 classes
- S2_UNAUTHENTICATED
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0C00
- Z wave version
- 6.81.01
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0371
- Product type id
- 0x0102
- Long description
- Aeotec Door/ Window Sensor 7 is a small window position sensor for your smart home, it monitors window and their exact opening position and lets your know when a window is tilted or completely opened. It also supports connecting external binary sensors through the dry binary contact of the Door/ Window sensor.
- Hardware platform
- ZM5101
- Short description
- Z-Wave Door/ Window Sensor 7.
- Product identifier
- ZWA008-A
- Countries / regions
- United States of America
- Certification number
- ZC10-19076677
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Supported multilevel sensors
- Multilevel Sensor Type General purpose
- Supported notification types
- Notification Type Event / State Access Control
- Value updatable by consumer by rf sensors value open/closed (binary) supported notification types value access control home security power management battery quantity value 1 battery type value 1/aa color value white association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 internal magnet sensor used 1 1 external terminal inputs used 2 sensor state polarity this parameter defines the polarity of the magnet sensor. 0 1 0 0 0 from to description 0 0 closed when magnet in proximity 1 1 opened when magnet in proximity 4 range test after double click allows to enable the activation of a z wave range test with double clicking the tamper switch. 0 1 0 0 0 from to description 0 0 disabled 1 1 enabled 5 2nd association group trigger his parameter defines the status of the magnet switch that causes sending a basic command to all devices of association group 2. 0 1 0 0 0 from to description 0 0 switch after ‘open‘ and ‘close‘ 1 1 switch after ‘open‘ 2 2 switch after ‘close‘ 6 command sent to devices of association group 2 this parameter defines which commands is sent to 2nd association group 0 1 0 0 2 from to description 0 0 on 1 1 off 2 2 on and off 7 basic command value sent to 2nd association group on ‘on‘ event this is the basic command value sent in case of ‘on‘ event. 0 1 0 0 1 from to description 1 1 value 0 99 value 8 basic command value sent to 2nd association group on ‘off‘ event this is the basic command value sent in case of ‘off‘ event. 0 1 0 0 0 from to description 1 1 value 0 99 value 9 time delay of ‘off‘ command frame off command is sent after a delay defined in this parameter. 0 2 0 0 0 from to description 0 32400 seconds 10 time delay of ‘off‘ command frame off command is sent after a delay defined in this parameter. 0 2 0 0 0 from to description 0 32400 seconds 11 delay of tamper alarm cancellation time a tamper alarm is delayed. 0 2 0 0 0 from to description 0 32400 seconds texts
