Skip to main content

Loading…

Door / Window Sensor 7 Pro — Aeotec — Off Screen Space

Off Screen Space

Door / Window Sensor 7 Pro

Aeotec · Sensor

Door / Window Sensor 7 Pro

View all Aeotec products

Connectivity: Z-WaveCategory: Sensor

Z-WaveCertified

App supportiOSRecently updated· Apr 2026

Aeotec Door/ Window Sensor 7 Pro is built on the 700 series Z-Wave technology. Its a small window position sensor for your smart home, it monitors window and their exact opening position and lets your know when a window is tilted or completely opened. It also supports connecting external binary sensors with a dry contact through the dry binary contact of the Door/ Window sensor. Using the latest technology it supports the highest Z-Wave security level of S2 and SmartStart.

Want to buy adds it to your wish list and follows Aeotec for updates. I own it adds it to your collection.

Compare

vs Competitor ▾

Connectivity

Z-Wave

Firmware

Current version HW: 1 FW: 1.00

Specifications

Overview

Company: Aeotec
Category: Sensor
Device type: Notification Sensor

Connectivity

Standard / protocol: Z-Wave
Connectivity: Z-Wave
Transport: Z-Wave
Spec version: 7.12.2
Z-Wave frequency: EU: 869.85MHz, 868.40MHz

Certification & compliance

Certificate ID

Community tags

Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).

From to description 7 0 all led indications on (values 1 + 2 + 4 summarized) 4 0 device tampering 0 0 led indication off 3 0 open/close status change + wake up (1+2 summarized) 5 0 open/close status change + device tampering (1 + 5 summarized) 6 0 wake up + device tampering (2 + 4 summarized) 2 0 wake up 1 0 open/close status change 1 sensor operation mode this parameter defines if the internal magnet sensor or the external terminal input is detected and used to issue alarm notification. there is always one input active only. the other sensor input the deactivated. 3 1 0 1 0 from to description 1 0 external terminal inputs used and scene activation disabled 0 0 internal magnet sensor used and scene activation enabled 5 range test after double click allows to enable the activation of a z wave range test with double clicking the tamper switch. 3 1 0 1 0 from to description 1 0 enabled 0 0 disabled 6 2nd association group trigger this parameter defines the status of the magnet switch that causes sending a basic command to all devices of association group 2. 3 1 0 2 0 from to description 2 0 switch after close 1 0 switch after open 0 0 switch after open and close 3 sensor state polarity this parameter defines the polarity of the magnet sensor. 3 1 0 1 0 from to description 1 0 opened when magnet near 0 0 closed when magnet near 7 command sent to devices of association group 2 this parameter defines which commands is sent to 2nd association group 3 1 0 2 2 from to description 1 0 off 2 0 on and off 0 0 on 9 basic command "off event" value this is the basic command value sent in case of "off" event. 2 1 0 255 0 from to description 255 255 value 0 99 value 10 time delay of "on" command frame on command is sent after a delay defined in this parameter. 2 2 0 32400 0 from to description 0 32400 seconds 8 basic command "on event" value this is the basic command value sent in case of "on" event. 2 1 0 255 255 from to description 0 99 value 255 255 value 11 time delay of "off" command frame off command is sent after a delay defined in this parameter. 2 2 0 32400 0 from to description 0 32400 seconds 17 5th association group triggers parameter defines events which result in sending on/off commands to devices added to the 2nd association group. these commands are sent alternately to switch the devices on and off. commands represent the values of basic set command frames. 2 1 0 2 0 from to description 0 0 switch after open and close 1 1 switch after open 2 2 switch after close 255 reset parameter 0 – nothing happens 0x55555555 – completely factory reset sensor and send device reset locally notification. all other values – reset all parameter settings to their default settings. 2 4 0 1431655765 0 from to description 1 1431655764 reset all parameter settings to their default settings. 1431655765 1431655765 completely factory reset sensor and send device reset locally notification. 2 dry contact operation mode parameter defines how dry contact will operate with the sensor or switch that is connected to the dry contact terminals. 0 no toggle / follow state will follow the input of the dry contact terminals where off is closed, and on is open. 1 nc toggle / follow state will follow the input of the dry contact terminals where on is closed, and off is open. 2 no save state will allow state of sensor to toggle open/close based on off to on signal. 3 nc save state will allow state of sensor to toggle open/close based on on to off signal. 2 1 0 3 0 from to description 2 2 no save state will allow state of sensor to toggle open/close based on off to on signal. 1 1 nc toggle / follow state will follow the input of the dry contact terminals where on is closed, and off is open. 0 0 no toggle / follow state will follow the input of the dry contact terminals where off is closed, and on is open. 3 3 nc save state will allow state of sensor to toggle open/close based on on to off signal. texts