- Name
- Central Home Unit
- Brand
- baseCON
- Texts
- ID Description Value 23
- Features
- Feature Values Communications Protocol
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_CONTROLLER_CENTRAL_STATIC
- User icon
- 0x0500
- Categories
- All Controllers, Gateway Controller
- Product id
- 0x0001
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED, S2_ACCESS_CONTROL
- Device type
- Gateway
- Oem version
- HW: 1 FW: 4.37:02.61:01.00:01.00
- Library type
- CONTROLLER_BRIDGE
- Supports nwi
- Yes
- Installer icon
- 0x0500
- Z wave version
- 6.51.08
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0348
- Product type id
- 0x0001
- Long description
- The Central Home Unit is the main entity to observe and control any other Z-Wave certified device available on the market. The integrated User-Interface allows the user to fully monitor, configure and control devices. The user can get the actual values of any device actively or passively to not overload the network usage over the air. Additionally, the user can set values for devices which acts as actors in the network. The User-Interface also allows the user to create specific rules, e.g. to turn off a device if a consumption is reached or to shut down the curtains at a given point of time. Devices can be grouped together to act collectively on specific events, e.g. if a fire alarm was detected. The user can monitor the whole Z-Wave network and control it. In detail, the user can add, remove or replace devices to or from the network. He can configure connections and reset the whole network. Every node can be updated independently if needed. Every device can also be configured on its own. With this ability devices of the same type can act differently. To have a better monitoring overview each device can be associated with a human readable name and a location description. The User-Interface only allows to control and monitor the capabilities the device offers. The Central Home Unit can also be configured as slave device in a Z-Wave network to support any other Controller device.
- Hardware platform
- OTHER
- Short description
- The Central Home Unit is the main entity to observe and control any other Z-Wave certified device available on the market.
- Product identifier
- CHU00001-w
- Countries / regions
- European Union
- Certification number
- ZC10-18036034
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_SENSOR_ALARM
- Value z wave z/ip color value white firmware updatable value not updatable z wave scene type value central scene communications connections value ethernet (wired) usb (universal serial bus) controller supports multiple networks supported notification types value smoke alarm co alarm co2 alarm heat alarm water alarm access control home security power management system emergency alarm clock appliance home health siren water valve weather alarm irrigation gas alarm sensors value motion/no motion (binary) air temperature luminance moisture humidity open/closed (binary) smoke density heat freeze vibration/shock (binary) ultraviolet index heart rate general purpose power velocity direction atmospheric pressure barometric pressure solar radiation dew point rain rate tide level weight voltage current air flow tank capacity distance rotation water temperature soil temperature seismic intensity seismic magnitude loudness time formaldehyde ch2 o level radon concentration methane density volatile organic compound soil humidity soil reactivity soil salinity blood pressure muscle mass fat mass bone mass total body water basic metabolic rate body mass index acceleration x axis acceleration y axis acceleration z axis water flow water pressure rf signal strength particulate matter respiratory rate electrical resistivity electrical conductivity carbon dioxide carbon monoxide frequency target temperature association groups
- Group Number Maximum Nodes Supported End Point ID Description 1