- Name
- Smoke Detector
- Brand
- CLIMAX TECHNOLOGY
- Texts
- ID Description Value 8
- Features
- Feature Values Battery Quantity
- Documents
- Category File Manual_English
- Role type
- ROLE_TYPE_END_NODE_ALWAYS_ON
- User icon
- 0x0C01
- Categories
- Sensors
- Identifier
- SD-32-AC-ZW
- Product id
- 0x0027
- S2 classes
- S2_AUTHENTICATED, S2_UNAUTHENTICATED
- Description
- SD-32-AC-ZW is a wireless smoke detector designed to protect you against potential fire hazards. The Smoke Detector uses multi-criteria sensor technology to distinguish between fast-burning flames and slow-smoldering fires, while at the same time incorporates intelligent technology to differentiate between cooking smoke and actual life-threatening house-fire emergencies, virtually eliminating nuisance alarms. In addition to its smoke detection capabilities, the Smoke Detector also features heat detection and temperature report to users. The Smoke Detector is a Z-Wave® enabled device and is fully compatible with any Z-Wave® enabled network. Z-Wave® is a wireless communication protocol that uses a low-power RF radio. By taking advantage of the Z-Wave® mesh network, commands can be transmitted to their destination via Z-Wave® products. The Z-Wave® Smoke Detector allows access to the “S2 Unauthenticated” class. The Smoke Detector’s alarm situations, battery condition, operating conditions, supervisory data and general fault information are sent to the Z-Wave® Gateway/Control Panel wirelessly. The device can also be serially connected with other sensors in the Z-Wave® gateway to serve as an extra siren. When any other sensor in the Z-Wave® network is activated and sends an alarm signal, the Smoke Detector will also raise alarm with its built-in buzzer as a siren to help sound warning.
- Device type
- Notification Sensor DT
- Oem version
- HW: 255 FW: 04.07
- Library type
- END_NODE_ENHANCED_232
- Product line
- Z-Wave Accessories
- Supports nwi
- Yes
- Installer icon
- 0x0C01
- Z wave version
- 6.85.02
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x018E
- Product type id
- 0x0003
- Hardware platform
- ZM5202AE-CME3
- Short description
- The SD-32-AC-ZW wireless smoke detector uses multi-criteria sensor technology to detect fast-burning and slow-smoldering fires, and intelligent system to minimize false alarms from cooking smoke.
- Countries / regions
- European Union
- Supports smart start
- Yes
- Certification number
- ZC14-25050523
- Radio range z wave (m)
- 40
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SENSOR_MULTILEVEL_V11
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Supported notification types
- Notification Type Event / State Smoke Alarm
- Value 3 battery type value ni mh 200mah aaa firmware updatable value updatable by consumer by rf association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile 1
.jpg)
.jpg)
.jpg)
