- Name
- Z-Wave Smart Switch Cover
- Brand
- Domitech Products, LLC
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_PORTABLE
- Categories
- All Lighting Devices, Lighting Accessories
- Product id
- 0x3132
- Device type
- Wall Controller
- Oem version
- HW: 255
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Z wave version
- 6.51.06
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x020E
- Product type id
- 0x5343
- Long description
- Smart Switch Cover with Z-Wave radio. • Built-in Z-Wave radio - can control Z-Wave Light Bulb and switches/dimmers remotely and wirelessly • Plug and play, simple setup. Fits over an existing wall switch. • Manually turn on, off, dim your lights while keeping the smart light bulb always online in your home network • Works with different types and brands of Z-Wave LED Light control devices • Powered by Z-Wave® 500 Series module inside • Manual reset capability • Powered by 2 pieces of standard CR2032 Lithium Coin Cell with long battery life
- Hardware platform
- ZM5202
- Short description
- Smart Switch Cover with Z-Wave radio. The ZSC can control the Z-Wave Smart LED Bulb as well as other Z-Wave light control devices
- Association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- Product identifier
- ZSC
- Countries / regions
- United States of America
- Certification number
- ZC10-15100004
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 4
- Supports explorer frames
- Yes
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- From to description 0 1 reverse button 1 activation of central scene the valid values can be set from 0 to 99. each valid value can turn on two scenes. if the valid value is set to n, top button is assigned to control 2 n+1 scene, and bottom button is assigned to control 2 n+2 scene. for example, if the value is set as 4, scene #7 will be activated when top button is pressed, scene #8 will be activated when bottom button is pressed. 0 1 0 0 0 from to description 0 99 zsc control scene through central scene command class 2 control mode user can set the zsc to control other devices or they issue various scene activation commands to a central controller. when value = 0, zsc can activate the scene which is pre set by gateway, and then control the associated smart bulbs in either group 2 or group 3. when value = 1, zsc can only activate the scene which is pre set by gateway. when value = 2, zsc can only control smart bulbs in association group 2 and group 3. 0 1 0 0 0 from to description 0 2 issue varies scene activation commands to a central controller texts
- ID Description Value 2
