- Name
- EZmultiPli
- Brand
- Express Controls LLC
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0c07
- Categories
- Sensors
- Product id
- 0x0001
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Notification Sensor
- Oem version
- HW: 3 FW: 2.01
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0c07
- Z wave version
- 6.81.00
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x001E
- Product type id
- 0x0004
- Long description
- Notify caregivers when a loved one does not get up at their usual time or gets up multiple times during the night. Easily installed in a kitchen, bathroom, bedroom or hallway - just plug it in! The wide angle motion sensor detects motion when placed at floor level in a normal wall outlet or at counter height in a kitchen or bath. Never needs batteries! Receive an email or text when motion is detected or the temperature is dangerously low while you are away. Turn on lights and sirens automatically. Save energy by automatically turning off lights in unoccupied rooms or hallways. Set the color LED night light to inform you that your garage door is open, there is a severe weather alert or any indicator you can imagine! Operates as a Z-Wave range extender utilizing fifth generation Z-Wave technology to enhance the reliability and speed of every device on a Z-Wave network. Version 2.0 firmware adds AES-128 security S2 and SmartStart
- Hardware platform
- ZM5202
- Short description
- Motion, Temperature, light level sensor, color LED, Z-Wave range extender that never needs batteries. Now with SmartStart.
- Product identifier
- EZMultiPli
- Countries / regions
- United States of America
- Supports smart start
- Yes
- Certification number
- ZC10-18015976
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 3
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_NODE_NAMING
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Supported notification types
- Notification Type Event / State Home Security
- Value updatable by consumer by rf supported notification types value home security sensors value motion/no motion (binary) air temperature luminance association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 255 minutes between sensor readings 4 temp min a temperature report is sent to the lifeline every temp min minutes. temperature values can be obtained at any time by polling. 1 1 1 255 60 from to description 1 255 minutes between sensor readings 2 on level on level is the value sent by the z wave basic set command to all association group 2 nodes when motion is detected. a value of 0 will turn the lights off (not recommended). a value between 1 and 99 will set the dim level to between 1% and 99% (99% is full on). a value of 1 will turn the light “on” which depends on the device but most will set the dim level to the last dim setting. 0 1 1 99 99 from to description 1 1 set to previous on value 0 0 not recommended 1 99 dim level to set the associated device to 5 temp adj temp adj is a twos complement number that is used to adjust the temperature reading to make it more accurate. the value is in tenths of degree fahrenheit. the temperature reading can be adjusted by +12.7 f to 12.8 f. a value of 1 will adjust the temperature reading by +0.1 f. a value of 1 will adjust the temperature by 0.1 f. a value of 123 will adjust the temperature by +12.3 f. 0 1 128 127 0 from to description 128 127 temperature adjustment in 0.1 f texts
- ID Description Value 6
