- Name
- ZWS12
- Brand
- FAKRO
- Features
- Feature Values Window Covering Control Features
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x1A00
- Categories
- Window Covering
- Product id
- 0x0011
- Device type
- Window Covering - Pos/End Aware
- Oem version
- HW: 25 FW: 1.01:01.01
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x1A00
- Z wave version
- 6.61.00
- Frequency plans
- RU: 869.00MHz
- Manufacturer id
- 0x0085
- Product type id
- 0x0002
- Long description
- FAKRO ZWS12 chain motor thanks to their small dimensions and suitable force output are ideal for roof window operating, being fully compatible with the Z-Wave Plus system. The motors can be applied in both centre pivot and top hung and pivot roof windows as well as windows of non-standard dimensions. The chain has 2 output speed and reach 24cm. The ZWS12 motor is equipped with encoder and two limit switches: limit switch at maximum chain travel position, overload limit in both directions (used mainly when closing the window). This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. ZWS12 also can be controlled manually by button and closed by rain sensor and timer. There are four association groups in actuator ZWS12: Life Line – group for position reporting actuator after each a stoppage and alarm reporting Basic Repeat – group used to transfer the received basic commands to the devices included in this group. Multilevel Repeat – group used to transfer the received multilevel commands to the devices included in this group. Basic Rain – group used to transfer the received commands from actuator & rain detector to the devices included in this group. Z-Wave Plus Secure Enabled Product This device is a security enabled Z-Wave Plus product that is able to use encrypted Z-Wave Plus messages to communicate to other security enabled Z-Wave Plus products. Technical Parameters: Chain reach: 240 mm Output power : 9 W Rated current: 0.72 A Standby current: 0.03 A Chain pushing force: 250 N Closing force: 200 N Current limit: YES Power voltage: 15V DC Power cable: 2 x 0.75 mm2 (0,4 m)
- Hardware platform
- ZM5202
- Short description
- FAKRO ZWS12 chain actuator is fully compatible white Z-Wave Plus protocol. Is dedicated for roof window operating. The maximum chain reach is 24cm. Motor is equipped with encoder and secure transmission.
- Product identifier
- ZWS12 RU
- Countries / regions
- Russian Federation
- Certification number
- ZC10-18036065
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 7
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_NODE_NAMING
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type Rain rate
- Supported notification types
- Notification Type Event / State Water Alarm
- Value position aware manual calibration supports up/down motion color value white sensors value rain rate switch type value push button with indicator supported notification types value water alarm power management association groups
- Group Number Maximum Nodes Supported End Point ID Description 2
- From to description 1 4 1 the lowest speed, 4 the higest speed, 2 default 8 motor speed ii (rain sensor) this parameter change motor speed when rain sensor turned on servomotor 0 1 0 0 2 from to description 1 4 1 the lowest speed, 4 the higest speed, 2 default texts
- ID Description Value 1