Skip to main content

Loading…

Smart Implant — Fibar Group S.A. — Off Screen Space

Off Screen Space

Smart Implant

Fibar Group S.A. · Sensor

Smart Implant

View all Fibar Group S.A. products

Connectivity: Z-WaveCategory: Sensor

Z-WaveCertified

FIBARO Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave network communication. You can connect binary sensors, analog sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensor to report their readings to the Z-Wave controller. It can also control devices by opening/closing output contacts independently of the inputs. Main features: - Allows for connecting sensors: - 6 DS18B20 sensors, - 1 DHT sensor, - 2 2-wire analog sensor, - 2 3-wire analog sensor, - 2 binary sensors. - Built-in temperature sensor. - Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption. - Works as a Z-Wave signal repeater. - May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

Want to buy adds it to your wish list and follows Fibar Group S.A. for updates. I own it adds it to your collection.

Compare

vs Competitor ▾

Connectivity

Z-Wave

Firmware

Current version HW: 2 FW: 5.02

Specifications

Overview

Company: Fibar Group S.A.
Category: Sensor
Device type: Notification Sensor

Connectivity

Standard / protocol: Z-Wave
Connectivity: Z-Wave
Transport: Z-Wave
Spec version: 6.81.01
Z-Wave frequency: IL: 916.00MHz

Certification & compliance

Certificate ID

Community tags

Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).

More specs

Name: Smart Implant
Brand: Fibar Group S.A.
Features: Feature Values Color
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
User icon: 0x0C00
Categories: Sensors, All Lighting Devices, On/Off Switches/Devices, Security Systems
Product id: 0x7000
S2 classes: S2_UNAUTHENTICATED, S2_AUTHENTICATED
Device type: Notification Sensor
Oem version: HW: 2 FW: 5.02
Library type: SLAVE_ENHANCED_232
Supports nwi: Yes
Installer icon: 0x0C00
Z wave version: 6.81.01
Frequency plans: IL: 916.00MHz
Manufacturer id: 0x010F
Product type id: 0x0502
Long description: FIBARO Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave network communication. You can connect binary sensors, analog sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensor to report their readings to the Z-Wave controller. It can also control devices by opening/closing output contacts independently of the inputs. Main features: - Allows for connecting sensors: - 6 DS18B20 sensors, - 1 DHT sensor, - 2 2-wire analog sensor, - 2 3-wire analog sensor, - 2 binary sensors. - Built-in temperature sensor. - Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption. - Works as a Z-Wave signal repeater. - May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.
Hardware platform: ZM5101
Short description: FIBARO Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave network communication. You can connect binary sensors, analog sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensor. It can also control devices by opening/closing output contacts independently of the inputs.
Product identifier: FGBS-222
Countries / regions: Israel
Supports smart start: Yes
Certification number: ZC10-21057033
Radio range z wave (m): 40
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 54
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
Controlled command classes: Identifier Name Key Version COMMAND_CLASS_BASIC
Supported multilevel sensors: Multilevel Sensor Type Air temperature
Supported notification types: Notification Type Event / State Home Security
Value white firmware updatable value updatable by consumer by rf association groups: Group Number Maximum Nodes Supported End Point ID Group Name Profile Description 1

From to description 0 255 value sent to devices in 3rd association group when in2 input is deactivated 47 input 1 value sent to 2nd association group when activated this parameter defines value sent to devices in 2nd association group when in1 input is triggered (using basic command class). parameter is relevant only if parameter 20 is set to 0 or 1 (alarm mode). 1 2 0 255 255 from to description 0 255 value sent to devices in 2nd association group when in1 input is triggered 49 input 1 value sent to 2nd association group when deactivated this parameter defines value sent to devices in 2nd association group when in1 input is deactivated (using basic command class). parameter is relevant only if parameter 20 is set to 0 or 1 (alarm mode). 1 2 0 255 0 from to description 0 255 value sent to devices in 2nd association group when in1 input is deactivated 52 input 2 value sent to 3rd association group when activated this parameter defines value sent to devices in 3rd association group when in2 input is triggered (using basic command class). parameter is relevant only if parameter 21 is set to 0 or 1 (alarm mode). 1 2 0 255 255 from to description 0 255 value sent to devices in 3rd association group when in2 input is triggered 63 analog inputs minimal change to report this parameter defines minimal change (from the last reported) of analog input value that results in sending new report. parameter is relevant only for analog inputs (parameter 20 or 21 set to 4 or 5). setting too high value may result in no reports being sent. 1 1 0 100 5 from to description 0 0 reporting on change disabled 1 100 0.1 10 v, 0.1 v step 64 analog inputs periodical reports this parameter defines reporting period of analog inputs value. periodical reports are independent from changes in value (parameter 63). parameter is relevant only for analog inputs (parameter 20 or 21 set to 4 or 5). 1 2 0 32400 0 from to description 0 0 periodical reports disabled 60 32400 60 s 9 h 65 internal temperature sensor minimal change to report this parameter defines minimal change (from the last reported) of internal temperature sensor value that results in sending new report. 1 2 0 255 5 from to description 0 0 reporting on change disabled 1 255 0.1 25.5°c 66 internal temperature sensor periodical reports this parameter defines reporting period of internal temperature sensor value. periodical reports are independent from changes in value (parameter 65). 1 2 0 32400 0 from to description 0 0 periodical reports disabled 60 32400 60 s 9 h 67 external sensors minimal change to report this parameter defines minimal change (from the last reported) of external sensors values (ds18 b20 or dht22) that results in sending new report. parameter is relevant only for connected ds18 b20 or dht22 sensors. 1 2 0 255 5 from to description 0 0 reporting on change disabled 1 255 0.1 25.5 units, 0.1 68 external sensors periodical reports this parameter defines reporting period of analog inputs value. periodical reports are independent from changes in value (parameter 67). parameter is relevant only for connected ds18 b20 or dht22 sensors. 1 2 0 32400 0 from to description 0 0 periodical reports disabled 60 32400 60 s 9 h 150 input 1 sensitivity this parameter defines the inertia time of in1 input in alarm modes. adjust this parameter to prevent bouncing or signal disruptions. parameter is relevant only if parameter 20 is set to 0 or 1 (alarm mode). 1 1 1 100 10 from to description 1 100 (10 ms 1000 ms) 151 input 2 sensitivity this parameter defines the inertia time of in2 input in alarm modes. adjust this parameter to prevent bouncing or signal disruptions. parameter is relevant only if parameter 21 is set to 0 or 1 (alarm mode). 1 1 1 100 10 from to description 1 100 (10 ms 1000 ms) 152 input 1 delay of alarm cancellation this parameter defines additional delay of cancelling the alarm on in1 input. parameter is relevant only if parameter 20 is set to 0 or 1 (alarm mode). 1 2 0 3600 0 from to description 0 0 no delay 1 3600 1 3600 s 153 input 2 delay of alarm cancellation this parameter defines additional delay of cancelling the alarm on in2 input. parameter is relevant only if parameter 21 is set to 0 or 1 (alarm mode). 1 2 0 3600 0 from to description 0 0 no delay 1 3600 1 3600 s 154 output 1 logic of operation this parameter defines logic of out1 output operation. 1 1 0 1 0 from to description 0 0 contacts normally open / closed when active 1 1 contacts normally closed / open when active 155 output 2 logic of operation this parameter defines logic of out2 output operation. 1 1 0 1 0 from to description 0 0 contacts normally open / closed when active 1 1 contacts normally closed / open when active 156 output 1 auto off this parameter defines time after which out1 will be automatically deactivated. 1 2 0 27000 0 from to description 0 0 auto off disabled 1 27000 0.1 s 45 min, 0.1 s step 157 output 2 auto off this parameter defines time after which out2 will be automatically deactivated. 1 2 0 27000 0 from to description 0 0 auto off disabled 1 27000 0.1 s 45 min, 0.1 s step 24 inputs orientation this parameter allows reversing operation of in1 and in2 inputs without changing the wiring. use in case of incorrect wiring. 1 1 0 1 0 from to description 0 0 default (in1 1st input, in2 2nd input) 1 1 reversed (in1 2nd input, in2 1st input) 25 outputs orientation this parameter allows reversing operation of out1 and out2 inputs without changing the wiring. use in case of incorrect wiri ng. 1 1 0 1 0 from to description 0 0 default (out1 1st output, out2 2nd output) 1 1 reversed (out1 2nd output, out2 1st output) texts