Dimmer 2

Loading…

Dimmer 2 — FIBARO — Off Screen Space

FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it. Dimmer 2 is equipped with a smart algorithm of light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources in 3-wire connection. Active power and energy consumption allows to monitor and reduce electricity bills. Dimmer 2 is compatible with any Z-Wave or Z-Wave Plus Controller. FIBARO Dimmer 2 Product Identifier: FGD-212 Brand Name: FIBARO Z-Wave Certification Number: ZC10-15090017 Z-Wave Certification Date: 9/16/2015 Z-Wave Protocol Implementation Conformance Statement: View Download Remotely controlled light dimming module is designed to work with various types of light sources in 2 or 3-wire connection so it can operate with or without neutral lead. FIBARO Dimmer can switch or dim connected light source either through radio waves or through the wall switch connected directly to it. Dimmer 2 is equipped with a smart algorithm of light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources in 3-wire connection. Active power and energy consumption allows to monitor and reduce electricity bills. Dimmer 2 is compatible with any Z-Wave or Z-Wave Plus Controller. As a dimmer it operates under the following loads: • 230V operated conventional incandescent and halogen light sources • ELV electronic transformers (12V operated halogen lamps and dimmable LED bulbs) • MLV ferromagnetic transformers with 12V operated halogen lamps • dimmable LED bulbs • dimmable compact fluorescent CFL tube lamps • supported dimmable light sources with minimal power of 5VA (power factor > 0.5) using FIBARO Bypass FGB-002 Without dimming function it may work with: • compact fluorescent lamps • fluorescent tube lamps with electronic ballast • LED bulbs (power factor > 0.7) • supported light sources with minimal power of 5VA (power factor > 0.5) using FIBARO Bypass FGB-002 https://www.youtube.com/watch?v=K35uFXoa5c0

More specs

Name: Dimmer 2
Brand: FIBARO
Features: Feature Values Sensors
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
User icon: 0x0600
Categories: All Lighting Devices, Dimming Lighting Devices
Product id: 0xA000
Device type: Light Dimmer Switch
Oem version: HW: 2 FW: 3.05:03.05
Library type: SLAVE_ENHANCED_232
Supports nwi: Yes
Installer icon: 0x0600
Z wave version: 6.51.07
Frequency plans: JP: 922.50MHz, 923.90MHz, 926.30MHz
Manufacturer id: 0x010F
Product type id: 0x0102
Long description: FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it. Dimmer 2 is equipped with a smart algorithm of light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources in 3-wire connection. Active power and energy consumption allows to monitor and reduce electricity bills. Dimmer 2 is compatible with any Z-Wave or Z-Wave Plus Controller. FIBARO Dimmer 2 Product Identifier: FGD-212 Brand Name: FIBARO Z-Wave Certification Number: ZC10-15090017 Z-Wave Certification Date: 9/16/2015 Z-Wave Protocol Implementation Conformance Statement: View Download Remotely controlled light dimming module is designed to work with various types of light sources in 2 or 3-wire connection so it can operate with or without neutral lead. FIBARO Dimmer can switch or dim connected light source either through radio waves or through the wall switch connected directly to it. Dimmer 2 is equipped with a smart algorithm of light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources in 3-wire connection. Active power and energy consumption allows to monitor and reduce electricity bills. Dimmer 2 is compatible with any Z-Wave or Z-Wave Plus Controller. As a dimmer it operates under the following loads: • 230V operated conventional incandescent and halogen light sources • ELV electronic transformers (12V operated halogen lamps and dimmable LED bulbs) • MLV ferromagnetic transformers with 12V operated halogen lamps • dimmable LED bulbs • dimmable compact fluorescent CFL tube lamps • supported dimmable light sources with minimal power of 5VA (power factor > 0.5) using FIBARO Bypass FGB-002 Without dimming function it may work with: • compact fluorescent lamps • fluorescent tube lamps with electronic ballast • LED bulbs (power factor > 0.7) • supported light sources with minimal power of 5VA (power factor > 0.5) using FIBARO Bypass FGB-002 https://www.youtube.com/watch?v=K35uFXoa5c0
Hardware platform: ZM5202
Short description: Remotely controlled light dimming module is designed to work with various types of light sources in 2 or 3-wire connection so it can operate with or without neutral lead.
Product identifier: FGD-212
Countries / regions: Japan
Certification number: ZC10-19076642
Radio range z wave (m): 40
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 43
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
Controlled command classes: Identifier Name Key Version COMMAND_CLASS_BASIC
Supported multilevel sensors: Multilevel Sensor Type Power
Supported notification types: Notification Type Event / State Power Management
Supported / controlled meter types: Meter Type Rate Type Description Electric meter
Value power voltage current supported meter type value electric energy supported notification types value power management switch load capacity current value 0.25 1.1 a color value black association groups: Group Number Maximum Nodes Supported End Point ID Description 1

From to description 0 0 no reaction 1 1 turn on the load 2 2 turn off the load 3 3 load blinking 44 time of alarm state time of alarm state. note: alarm state may be cancelled earlier, as a result of pressing the switch or ending the z wave command frame. 0 2 0 0 600 from to description 1 132767 1 32767 seconds 45 overload alarm report overload alarm report (load power consumption too high) 0 1 0 0 1 from to description 0 0 no reaction 1 1 send and alarm frame 46 load error alarm report load error alarm report (no load, load failure, burnt out bulb) 0 1 0 0 1 from to description 0 0 no reaction 1 1 send and alarm frame 47 overcurrent alarm report overcurrent alarm report (short circuit, burnt out bulb causing overcurrent) 0 1 0 0 1 from to description 0 0 no reaction 1 1 send and alarm frame 48 surge alarm report surge alarm report (dimmer 2 output overvoltage) 0 1 0 0 1 from to description 0 0 no reaction 1 1 send and alarm frame 49 overheat and voltage drop alarm report overheat (critical temperature) and voltage drop (low voltage) alarm report 0 1 0 0 1 from to description 0 0 no reaction 1 1 send and alarm frame 9 saving the state of the device after a power failure the dimmer 2 will return to the last state before power failure. 0 1 0 0 1 from to description 1 1 the dimmer 2 restores its state before power failure 0 0 the dimmer 2 does not save the state before a power failure, it returns to „off” position 2 maximum brightness level the parameter can be changed manually after the calibration 0 1 0 0 99 from to description 2 99 percentage level of brightness 4 incandescence time of dimmable compact fluorescent lamps this parameter determines the time required for switching compact fluorescent lamps and certain types of light sources. setting this parameter to 0 will disable the incandescence functionality. 0 2 0 0 0 from to description 0 255 0s 25.5s 5 automatic control dimming step size dimming step percentage value 0 1 0 0 1 from to description 1 99 dimming step percentage value 6 automatic control time of a dimming step this parameter defines the time of single dimming step set in parameter 5 during the automatic control. 0 2 0 0 1 from to description 0 255 (0 2.55s, in 10ms steps) 7 manual control dimming step size this parameter defines the percentage value of dimming step during the manual control. 0 1 0 0 1 from to description 1 99 dimming step percentage value 11 all on/all off function parameter allows for activation/deactivation of z wave commands enabling/disabling all devices located in direct range of the main controller. 0 2 0 0 255 from to description 0 0 all on not active, all off not active 1 1 all on not active, all off active 2 2 all on active, all off not active 255 255 all on active, all off active 23 double click option set the brightness level to max 0 1 0 0 1 from to description 0 0 double click disabled; 1 1 double click enabled. 31 load control mode recognized during auto calibration load control mode recognized during auto calibration (read only) 0 1 0 0 0 from to description 0 0 leading edge; 1 1 trailing edge. 41 response to water flooding alarm response to water flooding alarm 0 1 0 0 2 from to description 0 0 no reaction 1 1 turn on the load 2 2 turn off the load 3 3 load blinking 1 minimum brightness level the parameter can be changed manually after the calibration. caution the maximum brightness level (parameter 2) must be greater than the minimum brightness level (parameter 1). 0 1 0 0 1 from to description 1 98 percentage level of brightness 3 incandescence level of dimmable compact fluorescent lamps virtual value set as a percentage level between parameters min (1%) and max. (99%). the dimmer 2 will set to this value after first switch on. it is required for warming up and switching dimmable compact fluorescent lamps and certain types of light sources. 0 1 0 0 1 from to description 1 99 percentage level of brightness 8 manual control time of a dimming step this parameter defines the time of single dimming step set in parameter 7 during the manual control. 0 2 0 0 5 from to description 0 255 (0 2.55s, in 10ms steps) 10 timer functionality (auto off) this parameter allows to automatically switch off the device after specified time from switching on the light source. it may be useful when the dimmer 2 is installed in the stairway. 0 2 0 0 0 from to description 0 0 function disabled 1 32767 time to turn off measured in seconds (1s 9.1h) 42 response to smoke, co or co2 alarm response to smoke, co or co2 alarm 0 1 0 0 3 from to description 0 0 no reaction 1 1 turn on the load; 2 2 turn off the load 3 3 load blinking 50 active power reports the parameter defines the power level change that will result in a new power report being sent. the value is a percentage of the previous report. 0 1 0 0 10 from to description 0 0 power reports disabled 1 100 (1 100%) power report threshold 52 periodic active power and energy reports parameter 52 defines a time period between consecutive reports. timer is reset and counted from zero after each report. 0 periodic reports disabled 1 32767 (1 32767 seconds) 0 2 0 0 3600 from to description 0 0 periodic reports disabled 1 32767 (1 32767 seconds) 53 energy reports energy level change which will result in sending a new energy report. 0 energy reports disabled 1 255 (0.01 2.55 k wh) report triggering threshold 0 2 0 0 10 from to description 0 0 energy reports disabled 1 255 (0,01 2,55 k wh) report triggering threshold 54 self measurement the dimmer 2 may include active power and energy consumed by itself in reports sent to the main controller. 0 1 0 0 0 from to description 0 0 self measurement inactive 1 1 self measurement active 58 method of calculating the active power this parameter defines how to calculate active power. it is useful in a case of 2 wire connection with light sources other than resistive. note parameter 58 is set to 0 after forced auto calibration. 0 1 0 0 0 from to description 0 0 measurement based on the standard algorithm 1 1 approximation based on the calibration data 2 2 approximation based on the control angle 59 approximated power at the maximum brightness level this parameter determines the approximate value of the power that will be reported by the device at its maximum brightness level. note parameter 59 works only when parameter 58 has a value other than 0. 0 2 0 0 0 from to description 0 500 (0 500 w) power consumed by the load at the maximum brightness level. texts

Connectivity

Firmware

Specifications

Overview

Connectivity

Certification & compliance

Community tags

Community

Edit history

Firmware & software

Identity & commercial

Lifecycle

More specs

Similar Lighting

More from FIBARO