Skip to main content

Loading…

FIBARO Swipe — FIBARO — Off Screen Space

Off Screen Space

FIBARO Swipe

FIBARO · Sensor

FIBARO Swipe

View all FIBARO products

Connectivity: Z-WaveCategory: Sensor

Z-WaveCertified

FIBARO Swipe is a revolutionary, battery or Micro USB powered gesture control pad that allows you to control devices through the Z-Wave network. Swipe your hand up, down, left or right in front of the pad, make circular gestures and use sequences of gestures to get full and intuitive control of your smart home. Installed device perfectly matches your interior design, as it resembles a picture frame. You can even personalize it with your favourite picture. Gesture controlled menu allow to add/remove or reset the device without dismounting it. The device is equipped with a buzzer that confirms performed gestures and other actions.

Want to buy adds it to your wish list and follows FIBARO for updates. I own it adds it to your collection.

Compare

vs Competitor ▾

Connectivity

Z-Wave

Firmware

Current version HW: 1 FW: 3.02:03.11

Specifications

Overview

Company: FIBARO
Category: Sensor
Device type: Wall Controller

Connectivity

Standard / protocol: Z-Wave
Connectivity: Z-Wave
Transport: Z-Wave
Spec version: 6.51.06
Z-Wave frequency: ANZ: 919.80MHz, 921.40MHz

Certification & compliance

Certificate ID

Community tags

Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).

From to description 0 0 default orientation 1 1 180 degree rotation 2 2 90 degree clockwise rotation 3 3 90 degree counter clockwise rotation 2 buzzer acoustic signal settings buzzer acoustic signal settings. note active acoustic signals can be selected in parameter 4. 0 1 0 0 1 from to description 0 0 gestures detection is not signalled 1 1 gestures detection is signalled 3 led diode visual indicator settings visual indication of gestures detection. 0 1 0 0 0 from to description 0 0 gestures detection is not indicated 1 1 gestures detection is indicated 4 buzzer signalling result of gesture recognition acoustic signalling of gesture recognition result (using the built in buzzer). note parameter 4 is relevant only if parameter 2 is set to 1. 0 1 0 0 3 from to description 1 1 only successful recognition is signalled 2 2 only failed recognition is signalled 3 3 successful and failed recognition is signalled 5 powering mode interval of updating the current mode this parameter determines how often the device checks if the usb power supply is connected and updates powering mode if needed. 0 2 0 0 4 from to description 0 0 powering mode is not updated 1 1080 (in minutes) time interval 7 hold gesture to enter the menu this parameter allows to choose if the menu can be entered using the hold gesture. caution after disabling the hold gesture in parameter 7, menu can be entered by using the b button only! 0 1 0 0 0 from to description 0 0 hold gesture to enter the menu enabled 1 1 hold gesture to enter the menu disabled 23 switch off control frame value for flick down gesture this parameter allows to set value sent in switch off command frame to the association group. 0 2 0 0 0 from to description 0 99 control frame value for flick down gesture 255 255 control frame value for flick down gesture 24 switch on control frame value for flick left gesture this parameter allows to set value sent in switch on command frame to the association group. 0 2 0 0 255 from to description 0 99 control frame value for flick left gesture 255 255 control frame value for flick left gesture 25 switch off control frame value for flick left gesture this parameter allows to set value sent in switch off command frame to the association group. 0 2 0 0 0 from to description 0 99 control frame value for flick left gesture 255 255 control frame value for flick left gesture 6 power saving mode (battery mode) this parameter determines operation of gesture detection when battery powered. when standby mode is selected, hold gesture must be performed to exit power saving mode and reactivate normal gesture recognition. the device in standby mode consumes the least battery life. when simple mode mode is selected, gesture recognition is always active, but only slowly performed gestures will be recognized properly (high battery consumption). 0 1 0 0 0 from to description 0 0 standby mode 1 1 simple mode 2 2 the swipe does not enter power saving mode 31 1st gestures sequence (slot 1) value containing sequence of gestures. see "sequences of gestures" on page 12 for more information. note parameters 31 36 can also be used to manually set a sequence according to details described in "sequences of gestures" on page 12. 0 2 0 0 0 from to description 0 1076 value containing sequence of gestures. texts