Skip to main content

Loading…

FIBARO Door/Window Sensor — FIBARO — Off Screen Space

Off Screen Space

FIBARO Door/Window Sensor

FIBARO · Sensor

FIBARO Door/Window Sensor

View all FIBARO products

Connectivity: Z-WaveCategory: Sensor

Z-WaveCertified

FIBARO Door/Window Sensor is a wireless, battery powered reed sensor compatible with the Z-Wave Plus standard. Changing the device’s status will automatically send signal to the Z-Wave controller and associated devices. Sensor can be used to trigger scenes and everywhere there is a need for information about opening or closing of doors, windows, garage doors, etc. Opening is detected by separating the sensor’s body and the magnet. In addition the FIBARO Door/Window Sensor supports one DS18B20 temperature sensor and has one potential free input. The FIBARO Door / Window Sensor is available in seven colors: white, silver, black, pearl powder, cappuccino, truffle surprise and dark chocolate. https://www.youtube.com/watch?v=K35uFXoa5c0

Want to buy adds it to your wish list and follows FIBARO for updates. I own it adds it to your collection.

Compare

vs Competitor ▾

Connectivity

Z-Wave

Firmware

Current version HW: 1 FW: 3.02

Specifications

Overview

Company: FIBARO
Category: Sensor
Device type: Notification Sensor

Connectivity

Standard / protocol: Z-Wave
Connectivity: Z-Wave
Transport: Z-Wave
Spec version: 6.51.06
Z-Wave frequency: US: 916.00MHz, 908.40MHz

Certification & compliance

Certificate ID

Community tags

Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).

From to description 1 1 enabled 0 0 disabled 31 reporting tamper alarm cancellation reporting cancellation of tamper alarm to the controller and 5th association group. 0 1 0 0 1 from to description 0 0 do not send tamper cancellation report 1 1 send tamper cancellation report 11 commands sent to 2nd association group command frames sent to devices added to the 2nd association group. 0 1 0 0 2 from to description 1 1 off 2 2 on &amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp; off 0 0 on 2 door/window or alarm status parameter defines state of the sensor when the magnet is close. if the alarm sensor is connected, it determines the output type. parameter inactive in external button mode (parameter 1 set to 1). 0 1 0 0 0 from to description 1 1 door/window opened 0 0 door/window closed 10 2nd association group triggers parameter defines events which result in sending on/off commands to devices added to the 2nd association group. these commands are sent alternately to switch the devices on and off. commands represent the values of basic set command frames. parameter is inactive in external button mode (parameter 1 set to 1). 0 1 0 0 0 from to description 2 2 switch after closing 0 0 switch after opening and closing 1 1 switch after opening 1 operation mode parameter defines device operation mode. caution do not install the magnet if the device is not used as a door/window sensor, as it might lead to the malfunction of the device. 0 1 0 0 0 from to description 0 0 door/window sensor or external alarm sensor 1 1 external button 50 interval of temperature measurements this parameter defines how often the temperature will be measured. the shorter the time, the more frequently the temperature will be measured, but the battery life will shorten. 0 2 0 0 300 from to description 0 0 temperature measurements disabled 5 32400 time in seconds 51 temperature reports threshold this parameter defines the change of temperature in comparison with last reported, resulting in temperature report being sent to the main controller. 0 2 0 0 10 from to description 0 0 temperature reports based on threshold disabled 1 300 temperature threshold 53 temperature offset the value to be added to the actual temperature, measured by the sensor (temperature compensation). 0 4 0 0 0 from to description 1000 1000 100 – 100 degrees celsius, in 0,1 degrees steps 55 high temperature alarm threshold if temperature is higher than set value, overheat notification will be sent and high temperature scene will be triggered (if activated). 0 2 0 0 540 from to description 0 1000 0 100 degrees celsius, in 0,1 degrees steps 71 alarm broadcast settings for broadcasting on/off commands, sensor alarm and tamper alarm. value other than 0 means alarms are sent in broadcast mode, to all devices only within the range of the device. they are not repeated by the mesh network. note values of parameter 71 may be combined, e.g. 1+2=3 means on/off commands and sensor alarm are sent in broadcast mode. 0 1 0 0 0 from to description 4 4 tamper alarm broadcast active 0 0 broadcasts inactive 1 1 on/off commands broadcast active 2 2 sensor alarm broadcast active 52 interval of temperature reports interval of temperature reports. note temperature measurement is performed before sending any report (regardless of parameter no. 50). excessive reporting can affect battery lifetime. reporting on the basis of temperature change (parameter no. 51) is recommended. 0 2 0 0 0 from to description 0 0 periodic temperature reports disabled 5 32400 time in seconds 54 temperature alarm reports temperature alarms reported to the z wave controller. thresholds are set in parameters 55 and 56. 0 1 0 0 0 from to description 1 1 high temperature alarm 2 2 low temperature alarm 3 3 high and low temperature alarms enabled 0 0 temperature alarms disabled 3 visual led indications this parameter defines events indicated by the visual led indicator. disabling events might extend battery life. note values of parameter 3 may be combined, e.g. 1+2=3 means opening/closing and wake up will be indicated by the visual indicator. 0 1 0 0 6 from to description 1 1 indication of opening/closing status change (input in) 2 2 indication of wake up (1 x click or periodical) 4 4 indication of device tampering 0 0 no indications texts