- Name
- FlexNET Dongle
- Brand
- FLEX AUTOMATION
- Features
- Feature Values Communications Connections
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices, On/Off Switches/Devices, Lighting Accessories
- Product id
- 0x0007
- S2 classes
- S2_UNAUTHENTICATED
- Device type
- Light Dimmer Switch
- Oem version
- HW: 1 FW: 1.01:01.00
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.71.01
- Frequency plans
- ANZ: 919.80MHz, 921.40MHz
- Manufacturer id
- 0x002C
- Product type id
- 0x0002
- Long description
- FlexNET Dongle is a device that converts FlexNET Protocol (RS-485) to Z-Wave Protocol. This Device controls a total of 16+ Flex Lighting Panels via Z-Wave. FlexNET Dongle is Universal (One fits All). Using this device, you can control all functions of our Panels. It is a fully compatible with any Z-Wave enabled network. Z-Wave enabled devices displaying the Z-Wave logo can also be used with it regardless of the manufacturer. And ours can also be used in other manufacturer's Z-Wave enabled networks since FlexNET Dongle is used together with Flex Panels. This Device is designed to act as a repeater. Repeaters will re-transmit the RF signal to ensure the signal is received by its intended destination by routing the signal around obstacles and radio dead spots.
- Hardware platform
- ZM5202
- Short description
- FlexNET Dongle is a device that converts FlexNET Protocol (RS-485) to Z-Wave Protocol. This Device controls a total of 16+ Flex Lighting Panels via Z-Wave. FlexNET Dongle is Universal (One fits All).
- Product identifier
- Z-FlexNET Dongle
- Countries / regions
- Brazil
- Certification number
- ZC10-18036054
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SWITCH_MULTILEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_SWITCH_MULTILEVEL
- From to description 0 1 00 turn off buzzer / 01 turn on buzzer 2 set clock configure panel hour and minute 0 2 0 0 0 from to description 0 23 first byte hour 0 59 second byte minute texts
- ID Description Value 1
- Value rs 485 (serial) firmware updatable value updatable by manufacturer representative communications protocol value manufacturer's open/documented protocol z wave scene type value scene association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
