- Name
- Heatit Z-TRM7
- Brand
- Heatit
- Texts
- ID Description Value 8
- Features
- Feature Values Color
- Documents
- Category File Image_Product_Supplemental_3
- Role type
- ROLE_TYPE_END_NODE_ALWAYS_ON
- User icon
- 0x1201
- Categories
- Thermostats
- Identifier
- Z-TRM7
- Product id
- 0x3006
- S2 classes
- S2_AUTHENTICATED, S2_UNAUTHENTICATED
- Brand owner
- Heatit Controls AB
- Description
- Heatit Z-TRM7 is an electronic thermostat designed for electrical heating and water based heating control. The thermostat can be controlled through your Z-Wave® network, or via the buttons on the front of the thermostat. The thermostat features a user-friendly interface, complies with the Eco-Design directive and has an easy-to-read LED display. Heatit Z-TRM7 has 3 modes; Heat - Cool and Eco. The thermostat fits in standard European junction boxes and may be used with most System 55 frames. It has a sturdy metal frame for secure fastening in the junction box. The thermostat has one built-in room temperature sensor. Two additional external temperature sensors may also be connected. Heatit Z-TRM7 has active power metering, and it gives you the real time information about the power consumption. It also allows you to set the power metering value manually in case of connection with a contactor. The device is equipped with ZeroX™ technology, which ensures the relay switches at 0V when turning on and off. This technology significantly extends the thermostat’s lifespan. The thermostat can be set up with multiple associations and can be used as a master thermostat. It can control up to 10 thermostats and 10 external relays e.g wall plugs.
- Device type
- Thermostat DT
- Oem version
- HW: 01 FW: 02.00:01.02
- Library type
- END_NODE_ENHANCED_232
- Product line
- Thermostat
- Supports nwi
- Yes
- Installer icon
- 0x1200
- Z wave version
- 7.18.8
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x019B
- Product type id
- 0x0030
- Hardware platform
- EFR32ZG23A
- Short description
- Heatit Z-TRM7 is an electronic thermostat designed for electrical heating and water based heating control. Heatit Z-TRM7 has 3 modes; Heat - Cool and Eco. Heatit Z-TRM7 has active power metering, and it gives you the real time information about the power consumption.
- Countries / regions
- European Union
- Supports smart start
- Yes
- Certification number
- ZC14-26020583
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC_V2
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Supported notification types
- Notification Type Event / State Heat Alarm
- Supported / controlled meter types
- Meter Type Rate Type Electric meter
- Value white firmware updatable value updatable by consumer by rf ip (ingress protection) rated value 1 neutral wire required value 1 switch load capacity watts value 3600 thermostat modes value heat cool energy save heat thermostat power source value mains powered (120 v/240 v) association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile 1