- Name
- In-Wall Dimmer
- Brand
- Honeywell
- Features
- Feature Values Color
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x3038
- Device type
- Light Dimmer Switch
- Oem version
- HW: 255 FW: 5.28
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.51.08
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0039
- Product type id
- 0x4944
- Long description
- Transform any home into a smart home with the Honeywell In-Wall Dimmer. The In-Wall Dimmer can easily replace any standard in-wall switch and remotely controls a light in your home. Your home will be equipped with ultimate flexibility with the Honeywell Z-Wave Dimmer, capable of being used by itself or with up to four add-on switches. Screw terminal installation provides improved space efficiency when replacing existing switches and the integrated LED indicator light allows you to easily locate the switch in a dark room. The Honeywell Z-Wave In-Wall Dimmer is compatible with any Z-Wave certified gateway, providing access to many popular home automation systems. Take control of your home lighting with Honeywell Z-Wave Smart Controls!
- Hardware platform
- ZM5202
- Short description
- Transform any home into a smart home with the Honeywell In-Wall Dimmer.
- Product identifier
- 39351 / ZW3005
- Countries / regions
- United States of America
- Certification number
- ZC10-17125898
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 4
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Value white firmware updatable value updatable by consumer by rf switch load capacity watts value 600 neutral wire required switch type value decorator paddle rocker association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 default 1 1 invert switch 3 led light when shipped from the factory, the led is set to turn on when the connected light is turned off. this is the default setting and can be changed if your primary controller supports the node configuration function. to make the led turn on when the light is turned on, change parameter 3’s value to “1”. to turn the led off at all times, change parameter 3’s value to 2. 0 1 0 0 0 from to description 0 0 default 1 1 led on when load is on 2 2 led always off 7 dim rate adjustments dim rate adjustments when receiving z wave dim command 0 1 0 0 1 from to description 1 99 number of steps or levels 8 dim rate adjustments dim rate adjustments when receiving a z wave dim command 0 2 0 0 3 from to description 1 255 timing of steps 9 dim rate adjustments dime rate adjustments when manually controlled dimming 0 1 0 0 1 from to description 1 99 number of steps or levels 10 dim rate adjustments dim rate adjustments when manually controlling dimming 0 2 0 0 3 from to description 1 255 timing of steps 11 dim rate adjustments dim rate adjustments when receiving an all on or all off command 0 1 0 0 1 from to description 1 99 number of steps or levels texts
- ID Description Value 1