- Name
- Z-Wave Rotary Dimmer Switch
- Brand
- HZC ELECTRIC
- Features
- Feature Values Switch Type
- Documents
- Category Description File Image_Product_Supplemental_4
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices, Lighting Accessories
- Product id
- 0x0001
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Light Dimmer Switch
- Oem version
- HW: 1 FW: 1.17
- Library type
- SLAVE_ENHANCED_232
- Product line
- LED Dimmer
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.81.03
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0431
- Product type id
- 0x0202
- Long description
- The Dimmer controller is a switch multilevel device based on Z-Wave and it can be easy configuration, operation and can make the traditional LED dimmable lighting to be intelligent control. This Dimmer integrated Z-Wave communication module to connect with Z-Wave gateway and this device can be adapted to EU (868.42Mhz) The Dimmer controller can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase the reliability of the network. The Dimmer controller is also a security Z-Wave device and supports the Over The Air (OTA) feature for the product’s firmware upgrade. If you want your Dimmer controller to be a security device that use secure/encrypted message to communicate in a Z-Wave network, then a security enabled Z-Wave controller is needed.
- Hardware platform
- ZM5101
- Short description
- Z-Wave Rotary Dimmer Switch without neutral, suitable for new building and retrofitted house
- Product identifier
- EU-P10
- Countries / regions
- European Union
- Supports smart start
- Yes
- Certification number
- ZC10-20036888
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Value rotary knob communications protocol value manufacturer proprietary protocol firmware updatable value updatable by consumer by rf switch load capacity watts value 200 w association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Description 1
- From to description 0 0 off 1 1 on 2 2 returns to level before power outage 2 notification when load status change the dimmer will send notification to associated device (group lifeline) when the status of dimmer load is changed 0 1 0 2 1 from to description 1 1 send switch multilevel report . 2 2 send switch multilevel report only when load status is not changed by z wave command 0 0 the function is disabled texts
- ID Description Value 2
