- Name
- Smart Flood/Freeze Sensor
- Brand
- Jasco
- Features
- Feature Values Battery Quantity
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0C05
- Categories
- Sensors
- Product id
- 0x3430
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 7.03
- Library type
- SLAVE_ENHANCED_232
- Product line
- Wireless Lighting Controls
- Supports nwi
- Yes
- Installer icon
- 0x0C05
- Z wave version
- 7.13.5
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0063
- Product type id
- 0x4953
- Long description
- Heighten your senses with the Jasco Z-Wave Plus Flood/Freeze Sensor. When paired with a compatible hub, the smart sensor provides notification when water levels or temperatures change. Z-Wave devices can also be activated wirelessly for increased convenience and peace of mind. Your automation possibilities are seemingly infinite when connected to a compatible hub. • Trigger events – The sensor communicates with your hub to initiate desired actions of Z-Wave devices. Increase peace of mind by automatically turning on lights, sending a notification to your phone, activating an alarm or more when temperatures or water levels change. • Detection alarm – Built-in speaker emits audible alert when water levels or temperatures change to allow immediate action by anyone in the area. • Dual function – Base contacts and a detachable probe accommodate various setups. Recessed contacts on the base of the sensor are ideal for placement on flat surfaces. The included probe extends reach for use in wells, sump pump holes and other small spaces. • Temperature sensor – In temperature-sensitive spaces, protect against costly damage caused by freezing or overheating. • Indicator light – LED indicator displays status and provides feedback during programming. It also serves as notification if tampering with the sensor occurs. • Universal compatibility – Z-Wave Plus and all previous Z-Wave generations work together to allow continued expansion of your home-automation network.
- Hardware platform
- ZGM130
- Short description
- Heighten your senses with the Jasco Z-Wave Plus Flood/Freeze Sensor. When paired with a compatible hub, the smart sensor provides notification when water levels or temperatures change.
- Product identifier
- 52247/ZW6309
- Countries / regions
- United States of America
- Supports smart start
- Yes
- Certification number
- ZC12-20100126
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Flag ReInclude Size Min Value Max Value Default Value Parameter Values 23
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Supported notification types
- Notification Type Event / State Heat Alarm
- Value 1 battery type value cr123 firmware updatable value updatable by consumer by rf association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Description 1
- From to description 5 60 5... 60 minutes 360 360 hourly 720 720 12 hours 1440 1440 daily 52 temp report freq.(usb) set temp report freq. 1 yes 2 5 360 60 from to description 5 360 5... 360 minutes sent every 5 minutes, up to 6 hours 60 60 hourly 51 high temp alert level set high temp level 1 yes 2 4 122 104 from to description 4 122 high temp 53 led/buzzer action during tamper event set tamper indication 0 = no led, no beep (default) 1 = red led flash 5x, no beep 2 = red led cont flash, no beep 3 = no led, cont beep 4 = red led cont flash, cont beep 1 yes 2 0 4 0 from to description 0 0 no led, no beep 1 1 red led flash 5x, no beep 2 2 red led continuous flash, no beep 3 3 no led, continuous beep 4 4 red led continuous flash, continuous beep texts
- ID Description Value 2