- Name
- KASAIHOUCHIKIADAPTOR01
- Brand
- KDDI CORPORATION
- Features
- Feature Values Supported Notification Types
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C01
- Categories
- Sensors
- Product id
- 0x0061
- Device type
- Notification Sensor
- Oem version
- HW: 97 FW: 1.01
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0C01
- Z wave version
- 6.51.10
- Frequency plans
- JP: 922.50MHz, 923.90MHz, 926.30MHz
- Manufacturer id
- 0x016A
- Product type id
- 0x0A02
- Long description
- KASAIHOUCHIKIADAPTOR01 is a sensor notification device based on Z-Wave enhanced 232 slave library of V6.51.10. It is a fully functional Z-Wave® sensor that can detect a variety of dry contact signals, you just need to connection the matched external sensor on it, such as the water level sensor, dry contact switch, dry contact relay and so on. In other words, it can be used if the external sensor is a dry contact. It is also a security Z-Wave device and supports the Over The Air (OTA) feature for the product’s firmware upgrade. It can be included and operated in any Z‐Wave network with other Z‐Wave certified devices from other manufacturers and/or other applications. All non‐battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. It also supports Security Command Class and has the AES 128 bit security encryption built right in, so a security enabled controller is needed for fully to utilize its function.
- Hardware platform
- ZM5202
- Short description
- KASAIHOUCHIKIADAPTOR01 is a sensor notification device based on Z-Wave enhanced 232 slave library of V6.51.10.
- Product identifier
- UFA01A
- Countries / regions
- Japan
- Certification number
- ZC10-19026375
- Configuration parameters
- Parameter Number Name Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SENSOR_BINARY
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported notification types
- Notification Type Event / State Smoke Alarm
- Value smoke alarm firmware updatable value updatable by consumer by rf battery type value cr123 a color value white battery quantity value 1 association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 1 on=sensor binary report 0x00, off=sensor binary report 0x ff. 0 0 on=sensor binary report 0x ff, off=sensor binary report 0x00. 3 which value of the basic set will be sent when the sensor is triggered on/off. 0 1 0 0 0 from to description 0 0 on=basic set 0x ff, off=basic set 0x00. 1 1 on=basic set 0x00, off =basic set 0x ff. 111 set the interval time of battery report. 0 4 0 0 0 from to description 0 0 the periodic battery report is disabled. 1 2147483647 the range of interval time is 1 seconds to 2147483647 seconds. 122 set a notification type for the device. 0 1 0 0 1 from to description 4 4 the heat alarm notification type is selected for the sensor. 5 5 the water alarm notification type is selected for the sensor. 6 6 the access control notification type is selected for the sensor. 7 7 the home security notification type is selected for the sensor. 8 8 the power management notification type is selected for the sensor. 9 9 the system notification type is selected for the sensor. 10 10 the emergency alarm notification type is selected for the sensor. 11 11 the clock notification type is selected for the sensor. 1 1 the smoke alarm notification type is selected for the sensor. 2 2 the co alarm notification type is selected for the sensor. 3 3 the co2 alarm notification type is selected for the sensor. 255 reset the sensor. 0 4 0 0 0 from to description 0 0 reset to factory default settings. 1431655765 1431655765 reset to factory default settings and removed from the z wave network. 2 enable/disable wake up 10 minutes when re power on the sensor. 0 1 0 0 1 from to description 0 0 disable 1 1 enable texts