- Name
- PIR-Z-Wave
- Brand
- KPL
- Features
- Feature Values Sensors
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors
- Product id
- 0x0003
- Device type
- Notification Sensor
- Oem version
- HW: 255 FW: 5.36
- Library type
- SLAVE_ROUTING
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.51.09
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0214
- Product type id
- 0x0005
- Long description
- The Z-Wave sensor is equipped with Z-Wave500 series main control chip. It is a passive infrared intrusion sensor that adopts Energy Integration Logical Processing, Random Dynamic Time Segmentation & Digital Signal Processing Technologies. With precise columnar Fresnel lens, it can increase its energy receiving efficiency and sensitivity without false alarm. In conjunction with advanced software technology, it will make an accurate judgement between real intruder & interference factors that may cause false alarm. Superior ability to detect & prevent false positives. The pulse number is optional, suitable for kinds of residential constructions, preventing false positive & false negative that other ordinary indoor sensors cannot do. Its performance is far beyond other ordinary PIR alarms. Besides, we use large capacity built-in battery & special power saving solution, battery working life is up to 3 years.
- Hardware platform
- ZM5202
- Short description
- Indoor human passive infrared detector
- Product identifier
- IX32-Z-Wave
- Countries / regions
- United States of America
- Certification number
- ZC10-19076690
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type General purpose
- Supported notification types
- Notification Type Event / State Home Security
- Value motion/no motion (binary) battery type value aa supported notification types value home security association groups
- Group Number Maximum Nodes Supported End Point ID Description 2
- From to description 1 24 decimalism 1 24,to control the time to turn off the lights.the basic step value of time is 5 seconds.if the value is set to 4,start timing when the lights are turned on,turn off the lights after 4*5 seconds =20 seconds 3 pir sensor alarm elimination time configuration min set time is 5s. if the configuration is 1, that means it will eliminate alarm after 5 seconds, if t, will eliminate alarm after “5 x t” seconds. 0 1 0 0 4 from to description 1 24 decimalism 1 24,used to set to send the eliminate alarm time after pir alarm.the basic step value of time is 5 seconds,if the value is set to 4,send the eliminate alarm message after alarm 4 * 5 seconds = 20 seconds 1 basic set if there is any device under association group2, the pir sensor will send “basic set = value” command to control that device when the pir sensor is alarm. 0 1 0 0 255 from to description 1 100 decimalism 1 100,used for quantitative control of other z wave devices, like adjusting the brightness of lights. 255 255 decimalism 255,to control other devices that only receive basic set value = 0xff. texts
- ID Description Value 1
