- Name
- PIR-ZWAVE
- Brand
- KPL MOTION SENSOR
- Features
- Feature Values Supported Notification Types
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors
- Product id
- 0x0002
- Device type
- Notification Sensor
- Oem version
- HW: 255 FW: 5.36
- Library type
- SLAVE_ROUTING
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.51.09
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0214
- Product type id
- 0x0002
- Long description
- IX30-Z-Wave is a digital micro-control intrusion detector adopting Energy Accumulation Logical Processing & Random Dynamic Time Segmentation Technology. With precise columnar Fresnel lens, IX30-Z-Wave can increase its energy receiving efficiency and sensitivity without false alarm. In conjunction with advanced software technology, it will make an accurate judgment between real intruder & interference factors that may cause false alarm. Superior ability to detect & prevent false positives.
- Hardware platform
- ZM5202
- Short description
- IX30-Z-Wave is a kind detector which can detect human motion.when human move in the range of detection, the detector will send alarm information to the gateway
- Product identifier
- IX30-ZWAVE
- Countries / regions
- United States of America
- Certification number
- ZC10-17035481
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type General purpose
- Supported notification types
- Notification Type Event / State Home Security
- Value home security battery quantity value 2 battery type value aa sensors value motion/no motion (binary) association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 255 255 for on/off light only 1 100 dimmer level 2 turn off light time if there is any device under association group2, the pir sensor will send “basic set = value” command to group2, and send “basic set = 0x00” command to turn off light after “5 x t” seconds 0 1 0 0 4 from to description 1 24 turn off light time 3 pir sensor alarm elimination time configuration min set time is 5s. if the configuration is 1, that means it will eliminate alarm after 5 seconds, if t, will eliminate alarm after “5 x t” seconds. 0 1 0 0 4 from to description 1 24 pir sensor alarm elimination time configuration texts
- ID Description Value 5
