- Name
- S2 SmartPlug Dimmer
- Brand
- Minoston
- Features
- Feature Values Color
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0604
- Categories
- All Lighting Devices, Dimming Lighting Devices, Lighting Accessories
- Product id
- 0xFF0D
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Multilevel Switch
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Product line
- Line A
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 7.13.6
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0312
- Product type id
- 0xFF00
- Long description
- Transform any home into a smart home with the Z-Wave Smart Lighting Control and Appliance Module. The lighting control enables wireless control of on/off functions for standard table and floor lamps, and is compatible with incandescent, LED, Xenon, Halogen, fluorescent and compact fluorescent bulbs. Easily controlled by your mobile device or computer using any Z-Wave certified gateway, the space-saving horizontal module plugs into a standard wall receptacle without blocking the second outlet or obstructing placement of furniture. It provides a Z-Wave enabled outlet for the lamp or appliance that you would like to control and a regular pass-through AC outlet for other electrical appliances. Perfect for plug-in fans, heaters, lamps and more! Take control of your home lighting with Jasco Z-Wave Smart Lighting Controls!
- Hardware platform
- ZGM130
- Short description
- Transform any home into a smart home with the Z-Wave Smart Lighting Control and Appliance Module. The lighting control enables wireless control of on/off functions for standard table and floor lamps, and is compatible with incandescent, LED, Xenon, Halogen, fluorescent and compact fluorescent bulbs.
- Product identifier
- MP21ZS
- Countries / regions
- United States of America
- Supports smart start
- Yes
- Certification number
- ZC12-21040214
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 5
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4
- Value white firmware updatable value updatable by consumer by rf loads controlled value 10 switch load capacity watts value 1200 w switch type value push button association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Description 2
- From to description 0 65535 auto turn on this timer 8 restores state after power failure restores state after power failure parameter=8,size=1,value=0 output off value=1 output on value=2 out put the state after power default =2 2 1 0 2 2 from to description 0 0 output off 1 1 output on 2 2 out put the state after power 10 multilevel minimum value can be set multilevel minimum value can be set(local button)> this should apply to both for local or z wave operation parameter=10,size=1,value=0 disable value=1 . . value=99 default = 1 2 1 0 99 1 from to description 0 99 multilevel minimum value 11 multilevel maximum value can be set multilevel maximum value can be set(local button)> this should apply to both for local or z wave operation parameter=11,size=1,value=0 disable value=1 . . value=100 not accepted by hub default = 99 2 1 0 100 99 from to description 0 100 multilevel maximum value can be set 23 led indicator color led indicator color parameter=23,size=1,value=0 white value=1 blue value=2 green value=3 red default = 1 2 1 0 3 1 from to description 0 0 white 1 1 blue 2 2 green 3 3 red 3 auto turn off timer auto turn off timer values: 0 – 65535 (minutes) 2 4 0 65535 0 from to description 0 65535 auto turn off timer 2 led indicator parameter=2,size=1,value=0 on when off and off when on value=1 on when on and off when off value=2 always off value=3 always on default =0 2 1 0 3 0 from to description 0 0 on when off and off when on 1 1 on when on and off when off 2 2 always off 3 3 always on 9 ramp rate ramp rate(local button + z wave)> change to local and z wave like in the latest zen30 firmware, also applies to any multilevel changes (so there should be soft transition between 20 and 80% brightness if changed from the hub for example) parameter=9,size=1, value=1 from 0x63 to 0x00 or from 0x00 to 0x63 need 1s value=2 from 0x63 to 0x00 or from 0x00 to 0x63 need 2s . . value=99 from 0x63 to 0x00 or from 0x00 to 0x63 need 99s default = 1 2 1 1 99 1 from to description 1 99 from 0x63 to 0x00 or from 0x00 to 0x63 need this value texts