- Name
- Smart Toggle Dimmer Switch
- Brand
- Minoston
- Features
- Feature Values Color
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0604
- Categories
- All Lighting Devices, Dimming Lighting Devices, Lighting Accessories
- Product id
- 0xEE04
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Multilevel Switch
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Product line
- Line A
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 7.13.6
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0312
- Product type id
- 0xEE00
- Long description
- This light switch features: - Manual or remote on/off control and dimming from your mobile device or computer (when included to a Z-Wave gateway controller) - Z-Wave Plus with improved 500 chip for faster and safer wireless communication - Works with most high-quality DIMMABLE LED, CFL, and incandescent bulbs - Based on universal command classes - supported by most Z-Wave controllers - May be associated and grouped with other Z-Wave devices for advanced home automation - LED indicator to help locate the switch in dark space - Simple elegant design with screwless snap-on wall plate included - Built-in Z-Wave signal repeater for a stronger and more reliable network Z-Wave Signal Frequency: 908.42 MHz Power: 120 VAC, 60 Hz Maximum Loads: 600W Single-gang, 500W Double-gang, 400W Triple-gang Incandescent, 150W CFL or LED Minimum Load: 20W for LED and CFL bulbs Range: Up to 100 feet line of sight Operating Temperature: 32-104° F (0-40° C) Installation and Use: Indoor only
- Hardware platform
- ZGM130
- Short description
- This light switch features: - Manual or remote on/off control and dimming from your mobile device or computer (when included to a Z-Wave gateway controller)
- Product identifier
- MS13ZS
- Countries / regions
- United States of America
- Supports smart start
- Yes
- Certification number
- ZC12-21040210
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4
- Value white switch type value toggle firmware updatable value updatable by consumer by rf association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Description 1
- From to description 0 0 on when off and off when on 1 1 on when on and off when off 2 2 always off 3 3 always on 3 auto turn off timer auto turn off timer values: 0 – 65535 (minutes) 2 4 0 65535 0 from to description 0 65535 auto turn off timer 5 auto turn on timer auto turn on timer 2 4 0 65535 0 from to description 0 65535 auto turn on this timer 8 restores state after power failure restores state after power failure parameter=8，size=1，value=0 output off value=1 output on value=2 out put the state after power default =2 2 1 0 2 2 from to description 0 0 output off 1 1 output on 2 2 out put the state after power 9 ramp rate ramp rate（local button + z wave）> change to local and z wave like in the latest zen30 firmware, also applies to any multilevel changes (so there should be soft transition between 20 and 80% brightness if changed from the hub for example) parameter=9，size=1, value=1 from 0x63 to 0x00 or from 0x00 to 0x63 need 1s value=2 from 0x63 to 0x00 or from 0x00 to 0x63 need 2s . . value=99 from 0x63 to 0x00 or from 0x00 to 0x63 need 99s default = 1 2 1 1 99 1 from to description 1 99 from 0x63 to 0x00 or from 0x00 to 0x63 need this value 10 multilevel minimum value can be set multilevel minimum value can be set（local button）> this should apply to both for local or z wave operation parameter=10，size=1，value=0 disable value=1 . . value=99 default = 1 2 1 0 99 1 from to description 0 99 multilevel minimum value 24 led indicator brightness led indicator brightness parameter=24，size=1，value=0 bright (100%) value=1 medium (60%) value=2 low (30%) default =1 2 1 0 2 1 from to description 0 0 bright (100%) 1 1 medium (60%) 2 2 low (30%) 1 locally button function parameter=1，size=1，value=0 up button: on down button: off value=1 up button: off down button: on value=2 up button: on/off down button: on/off default = 0 2 1 0 2 0 from to description 0 0 up button on,down button off 1 1 up button off,down button on 2 2 up button on/off,down button on/off 25 single tap behavior single tap behavior: when switch is off and press upper paddle 1 time, switch turns on to x brightness （local button） parameter=25，size=1， value = 0 last brightness level value = 1 custom value set in parameter 18 value = 2 maximum brightness set in parameter 11 value = 3 full 100% brightness default = 0 2 1 0 3 0 from to description 2 2 maximum brightness set in parameter 11 3 3 full 100% brightness 0 0 last brightness level 1 1 custom value set in parameter 18 23 led indicator color led indicator color parameter=23，size=1，value=0 white value=1 blue value=2 green value=3 red default = 1 2 1 0 3 1 from to description 0 0 white 1 1 blue 2 2 green 3 3 red 11 multilevel maximum value can be set multilevel maximum value can be set（local button）> this should apply to both for local or z wave operation parameter=11，size=1，value=0 disable value=1 . . value=100 not accepted by hub default = 99 2 1 0 100 99 from to description 0 100 multilevel maximum value can be set texts
.jpg)
