Motion-Control — Nice — Off Screen Space

Skip to main content

Loading…

Motion-Control — Nice — Off Screen Space

From to description 0 3 motion detection pulse counter 4 motion detection window time period of time during which the number of moves set in parameter 3 must be detected in order for the pir sensor to report motion. the higher the value, the more sensitive the pir sensor is. it is not recommended to modify this parameter setting! 1 1 0 3 2 from to description 0 3 motion detection window time 6 motion detection operating mode this parameter determines in which part of day the pir sensor will be active. this parameter influences only the motion reports and associations. tamper, light intensity and temperature measurements will be still active, regardless of this parameter sett 1 1 0 2 0 from to description 0 2 operating mode 7 motion detection night/day this parameter defines the difference between night and day in terms of light intensity, used in parameter 8. 1 2 1 32767 200 from to description 1 32767 motion detection night/day 8 basic command class configuration this parameter determines the command frames sent to 2nd association group (assigned to pir sensor). values of basic on and basic off command frames can be modified with dedicated parameters (14 and 16). 1 1 0 2 0 from to description 0 2 basic command class configuration 9 basic on command frame value the command frame sent at the moment of motion detection. further motion detections, during the cancellation time, will not result in sending the association. 1 2 0 255 255 from to description 0 255 basic on command frame value 10 basic off command frame value the command frame sent at the moment of motion alarm cancellation, after cancellation delay time specified in parameter 6. 1 2 0 255 0 from to description 0 255 basic off command frame value 11 associations in z wave network security mode this parameter defines how commands are sent in specified association groups: as secure or non secure. parameter is active only in z wave network security mode. it does not apply to 1st group “lifeline" 1 1 0 8 0 from to description 0 8 associations in z wave network security mode 17 tamper backward compatible broadcast mode the parameter determines whether the backward compatible tamper alarm frame will or will not be sent in broadcast mode. alarm frames sent in broadcast mode can be received by all of the devices within range (if they accept such frames), but not repeated by them. this parameter provides backward compatibility with controllers not supporting z wave plus. 1 1 0 1 0 from to description 0 1 tamper backward compatible broadcast mode 23 temperature offset the value to be added to the actual temperature, measured by the sensor (temperature compensation). 1 2 1000 1000 0 from to description 1000 1000 temperature offset 24 visual led indicator signalling mode this parameter determines the way in which visual indicator behaves after motion has been detected. flashlight mode visual indicator glows in white for 10 seconds. if value of parameter 80 is set to 11, each detected motion extends the glowing by next 10 seconds. 1 1 0 24 10 from to description 0 24 visual led indicator signalling mode 25 visual led indicator brightness this parameter determines the brightness of the visual led indicator when indicating motion. 1 1 0 100 50 from to description 0 100 visual led indicator brightness texts