- Name
- Plug-in Dimmer (Dual Plug Simultaneous Control)
- Brand
- Resideo
- Features
- Feature Values Switch Load Capacity Watts
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x3033
- Device type
- Light Dimmer Switch
- Oem version
- HW: 255 FW: 5.21
- Library type
- SLAVE_ENHANCED_232
- Product line
- Resideo Smart Lighting Controls
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.51.08
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x041B
- Product type id
- 0x5044
- Long description
- Transform any home into a smart home with the Resideo Z-Wave Smart Lighting Control Lamp Module with Dimmer Control. The lamp module enables wireless control of on/off and dim functions for standard incandescent table and floor lamps, as well as dimmable fluorescent, LED and CFL fixtures and more! Use the dimmer control to customize the lighting output and create the perfect ambiance for any room. The space-saving horizontal module plugs into a standard wall receptacle without blocking the second outlet or obstructing placement of furniture. It provides a Z-Wave enabled outlet for the lamp you would like to control and one always-on, simultaneous control AC outlet for other electrical appliances. Take control of your home lighting with Resideo Z-Wave Smart Controls!
- Hardware platform
- ZM5202
- Short description
- Transform any home into a smart home with the Resideo Z-Wave Smart Lighting Control Lamp Module with Dimmer Control.
- Product identifier
- 39446 / ZW3107
- Countries / regions
- United States of America
- Certification number
- ZC10-20036902
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 3
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Value 300 firmware updatable value updatable by consumer by rf switch type value push button illuminated association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Description 1
- From to description 0 0 led on / device off 1 1 (default) led on / device on 2 2 disable led 6 parameter 6 dim up/down rate 1 1 0 1 0 from to description 0 0 (default) = dim up/down the light to the specified level quickly by command except value 0 and ff 1 1 1 = dim up/down the light to the specified level slowly by command except value 0 and ff 7 parameter 7 dim rate steps when using z wave controller (adjusts the number of steps the light level will stop on when dimming) 1 1 1 99 3 from to description 1 99 valid values 3 3 default 3 steps 8 parameter 8 dim rate timing when using z wave controller (adjusts the timing of each step in 10ms increments) 1 2 1 255 1 from to description 1 1 10ms per step 1 255 valid values 9 parameter 9 dim rate steps when manually controlled (adjusts the number of steps the light level will stop on when dimming 1 1 1 99 3 from to description 1 99 valid values 3 3 default 3 steps 11 parameter 11 dim rate steps when receiving all on/off command (adjusts the number of steps the light level will stop on when dimming) 1 1 1 99 3 from to description 1 99 valid values 3 3 default 3 steps 10 parameter 10 dim rate timing when manually controlled (adjusts the timing of each step in 10ms increments) 1 2 1 255 1 from to description 1 1 10ms per step 1 255 valid values texts
- ID Description Value 1
