- Name
- Curtain Motor Control with external module
- Brand
- Saykey
- Features
- Feature Values Window Covering Control Features
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x1A00
- Categories
- Motor Control
- Product id
- 0x0005
- Device type
- Window Covering - Pos/End Aware
- Oem version
- HW: 33 FW: 1.01:01.01
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x1A00
- Z wave version
- 6.51.09
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x032C
- Product type id
- 0x3007
- Long description
- The SK-3007-05 curtain motor external module support connect specify motor to Z-Wave system reply. It support control motor open/close/stop and position, meanwhile it can feedback motor position as soon as it stopped.
- Hardware platform
- ZM5202
- Short description
- The SK-3007-05 curtain motor external module support connect specify motor to Z-Wave system reply.
- Product identifier
- SK-3007-05
- Countries / regions
- European Union
- Certification number
- ZC10-17115871
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 4
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SWITCH_MULTILEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_SECURITY
- Value endpoint aware position aware manual calibration supports curtains supports vertical blinds supports horizontal blinds/louvers supports up/down motion supports open/close motion supports rotation motion communications connections value rs 232 (serial) rs 485 (serial) manufacturer proprietary communications protocol value manufacturer proprietary protocol firmware updatable value updatable by professional/technician association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 99 current position 127 127 unknown postion 6 set motor direction reverse support set only. toggle motor direction between reverse and default as send out set command with any value(0x00 0x ff). 0 1 0 0 0 from to description 128 127 toggle motor direction. 7 clear motor lead tail endpoint setting support set only. clear motor lead tail endpoint setting as send out set command with any value(0x00 0x ff). 0 1 0 0 0 from to description 128 127 clear motor lead tail endpoint setting 8 enable manual pull function support set only. enable manual pull function as send out set command with any value(0x00 0x ff). 0 1 0 0 0 from to description 128 127 enable manual pull function 9 disable manual pull function support set only. disable manual pull function as send out set command with any value(0x00 0x ff). 0 1 0 0 0 from to description 128 127 disable manual pull function texts
- ID Description Value 1
