- Name
- 4 in 1 PIR Sensor
- Brand
- Vision
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors
- Product id
- 0x2112
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Notification Sensor
- Oem version
- HW: 3 FW: 32.32
- Library type
- SLAVE_ENHANCED_232
- Product line
- Home Security
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 7.13.6
- Frequency plans
- ANZ: 919.80MHz, 921.40MHz
- Manufacturer id
- 0x0109
- Product type id
- 0x2021
- Long description
- * Includes Motion, Temperature, Humidity, and Light sensor * 360-degree detection (suitable for ceiling fixture) * Compact Size: 59*59*41mm * 1 x CR123Battery * Low Battery Detection * LED Status Indicator * 100feet line of sight
- Hardware platform
- ZGM130
- Short description
- This sensor monitors movement, and send Z-Wave TM signal when movement is detected inside the building. With Temperature, Humidity & Light sensor built inside, it will send the signal out when temperature, humidity & Lightness changed.
- Product identifier
- ZP3113BR-7
- Countries / regions
- Australia, Brazil, Malaysia
- Supports smart start
- Yes
- Certification number
- ZC12-21100319
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 4
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Supported notification types
- Notification Type Event / State Home Security
- Value not updatable association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile Description 1
- From to description 0 50 auto light report interval from off or 5%~50% 5 motion re triggering duration 1 ~ 127 (unsigned decimal) minutes (default: 3 minutes) 0 1 1 127 3 from to description 1 127 motion re triggering duration (in 1 ~ 127 minutes) 6 motion sensitivity 1 ~ 7 (default: 4) 0 1 1 7 4 from to description 1 7 motion sensitivity from level 1 ~ level 7 7 led flash mode selection 1 ~ 3 (mode 1 ~ mode 3) mode 1: led turn off (both temp/pir trigger) mode 2: led quick flash (temp. / pir trigger) mode 3: pir trigger (quick flash) temp. trigger (led off) 0 1 1 3 1 from to description 1 3 led flash mode selection 8 pir trigger notification re sending times 0 ~ 10 (unsigned decimal) times (default: 3 times) 1 1 0 10 3 from to description 0 10 pir trigger notification re sending times from 0 time to 10 times 1 temperature unit selection 0x00 = °c 0x01 = °f 0 1 0 1 0 from to description 0 0 choose °c 1 1 choose °f texts
- ID Description Value 17
.jpg)
