- Name
- Wink Motion Sensor
- Brand
- Wink
- Features
- Feature Values Battery Type
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors
- Product id
- 0x0001
- Device type
- Notification Sensor
- Oem version
- HW: 66 FW: 3.80
- Library type
- SLAVE_ROUTING
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.51.06
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x017F
- Product type id
- 0x0101
- Long description
- The Wink Motion Sensor is a Z-Wave Plus battery-powered device that senses motion in your home, helping you monitor activity around your home to keep your family safe. When motion is detected, your sensor will blink with a blue LED indicator and your Wink Hub or other Z-Wave Plus certified hub can send an alert to your smartphone, set off an alarm or chime, or trigger an automation such as turning on your lights. This sensor has flexible mounting options, convenient for multi surface installation on wall, ceiling, shelf or tabletop. The sensor body design with magnetic cradle and angled facet offers easy line-of-sight perspective of the area you wish to monitor, with an extra-wide 110° coverage area, and uses a spherical magnet to hold the sensor body in place, so that it can point in any direction. The Wink Motion Sensor offers an extra-long z-wave wireless range of up to 150 feet, and requires a Wink Hub or other Z-Wave Plus certified hub for operation. The Motion Sensor comes with a CR123A 3.0V battery and has a three-year battery life, and will send an alert to your smartphone when the device has low battery. · Z-Wave Plus Certified · Requires a Z-Wave Plus Certified Hub to operate · Works with all Z-Wave Plus compatible networks · Flexible Mounting Options · 110° Extra-Wide Coverage Area · Up to 150 feet range · Three-Year Battery Life (CR123A Battery included) · Low Battery Indication · Measurements in millimeters: 45 x 45 x 56.2 mm (combined depth of mount and sensor)
- Hardware platform
- ZM5202
- Short description
- Z-Wave Plus passive Infrared (PIR) motion sensor with ambient light sensing capabilities and a magnetic mount.
- Product identifier
- Wink Motion Sensor
- Countries / regions
- United States of America
- Certification number
- ZC10-17075686
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 3
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC_V2
- Supported multilevel sensors
- Multilevel Sensor Type General purpose
- Supported notification types
- Notification Type Event / State Access Control
- Value cr123 a battery quantity value 1 sensors value motion/no motion (binary) luminance color value white supported notification types value access control association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 255 255 on 0 0 turn off 1 99 dim level 4 enable/disable motion detection this setting enables or disables motion detection. 0 1 0 0 1 from to description 0 0 motion detection disabled 1 1 motion detection enabled 8 enable/disable group 2 ambient light threshold if this parameter is enabled, the motion detector will only send basic set commands to associon group 2 if the ambient light level is below the value set in parameter 05. for more information, see “group 2” on page 14. 0 1 0 0 0 from to description 1 1 group 2 ambient light threshold enabled 0 0 group 2 ambient light threshold disabled 9 ambient light sensitivity level this parameter sets the minimum change in ambient light level (in lux) the motion detector must detect before a multilevel sensor report is sent to the main controller. 0 1 0 0 100 from to description 0 255 in lux 5 group 2 ambient light threshold if parameter 8 is enabled, this setting sets the light level below which the motion detector will send basic set commands to association group 2 when motion is detected. for more information, see “group 2” on page 14. 0 2 0 0 100 from to description 5 1000 in lux 10 enable/disable led indicator if this parameter is enabled, the led indicator will flash everytime there motion is detected. if this is disabled, the led indicator will not flash to indicate motion events. 0 1 0 0 1 from to description 0 0 led disabled 1 1 led enabled 6 retrigger interval after each motion event, the motion detector is disabled for the amount of time set by this parameter before it can send out another “motion detected” notification report/binary sensor report. this value must be lower than the value of parameter 2, and if this parameter is reset to default settings, parameter 2 will also be reset. 0 1 0 0 8 from to description 1 8 in seconds 7 light sensing interval this parameter sets the amount of time between each successive ambient light level reading that is sent. this value must be less than the wakeup interval time (which is 43,200 seconds or 12 hours by default.) 0 2 0 0 180 from to description 60 3600 in seconds texts
