- Name
- Outdoor Siren
- Brand
- Z-Wave.Me
- Is flirs
- Yes
- Documents
- Category Description File Manual_Primary_Lang
- Categories
- Security Add-Ons
- Product id
- 0x0002
- Device type
- Siren
- Oem version
- HW: 1 FW: 1.01
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Z wave version
- 6.51.06
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0115
- Product type id
- 0x0004
- Long description
- This device is a siren for Z-Wave security systems. Due to its large solar panel it can be used without any additional power supply or batteries. The siren can be installed on any place on the outside of the house and can be controlled using Z-Wave. This way it extends security systems and calls attention in case of a triggered alarm. The siren issues a very loud sound (105 dBm) and in parallel some stroboscope light. Furthermore the device is self-protecting. Removing the main device from the mounting unit immediately starts the siren and also reports the tamper attempt to the Z-Wave control center. All communication between the Z-Wave controller and the siren is encrypted and secured to protect against manipulation.
- Hardware platform
- ZM5202
- Short description
- Solar Powered Secure Outdoor Siren
- Association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- Product identifier
- 005107
- Countries / regions
- European Union
- Certification number
- ZC10-15115001
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2
- Supports explorer frames
- Yes
- From to description 1 127 0.1 k 1 127 0.1 k 0 0 disabled 1 siren tamper mode sets the tamper triggering mode when removed from the holder 0 1 0 0 0 from to description 0 0 triggers automatically when it is removed from the holder. must be turned off, using the button or from the controller 2 2 does not trigger at all, when removed from the holder. service mode 1 1 triggers automatically when it is removed from the holder and turns off, when placed back on the holder 5 siren mode determines how the siren shall react on alarm 0 1 0 0 2 from to description 0 0 siren only 1 1 flash only 2 2 flash plus siren 6 auto off if the value is set, the siren will be switched off automatically after a defined alarm time in minutes. 0 1 0 0 5 from to description 0 0 no auto off 1 127 after x minutes 3 send unsolicited temperature report temperature threshold to send unsolicited temperature update 0 1 0 0 10 from to description 0 127 0.1 k 1 127 * 0.2 k texts
- ID Description Value 1
