- Name
- Heart Beat Sensor
- Brand
- Z-Works
- Features
- Feature Values Sensors
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0C00
- Categories
- Sensors
- Product id
- 0x0002
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 4.33:01.00:00.71
- Library type
- SLAVE_ENHANCED
- Supports nwi
- Yes
- Installer icon
- 0x0C0D
- Z wave version
- 6.61.00
- Frequency plans
- JP: 922.50MHz, 923.90MHz, 926.30MHz
- Manufacturer id
- 0x024D
- Product type id
- 0x0002
- Long description
- Z-Works Heat Beat Sensor is a compact Z-Wave Plus compatible device that can monitor up to 3 meters heart rate, breathing rate and activity of an individual. Once plugged to the wall, the sensor relies on 24 GhZ-frequency wave to analyze internal body movement and collect one's vital data. It can be used for example to ensure that a person laying in a bed is alive at night. Thanks to its 1/4" diameter socket used by the large majority of cameras, it can be attached to most tripods and suction pads for an easy installation.
- Hardware platform
- SD3502
- Short description
- Z-Works Heart Beat Sensor can monitor heart rate, breathing rate and activity of an individual remotely and in a contactless manner.
- Product identifier
- ZH-500-v1
- Countries / regions
- Japan
- Certification number
- ZC10-16115313
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 3
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_NOTIFICATION_V7
- Supported multilevel sensors
- Multilevel Sensor Type Heart rate
- Value heart rate respiratory rate color value white association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 6 120 time interval (x5 seconds) 0 0 auto report off 2 time interval for auto report time interval for auto report heart rate. 0 1 0 0 6 from to description 0 0 auto report off 6 120 time interval (x5 seconds) 6 high threshold for heart rate the high threshold for heart rate will be used to automatically send multilevel report of heart rate if the calculated heart rate goes over this value. 0 2 0 0 100 from to description 0 0 threshold deactivated 1 200 high threshold 1 power led control control the led of the device. 0 1 0 0 1 from to description 1 1 led on 0 0 led off 4 window size averaging window size for notification report. 0 1 0 0 3 from to description 1 8 window size interval (x5 seconds) 5 threshold for body/respiratory ratio the value of the body/respiratory ratio can take around 1000 to 8000. if there is no body motion, the value will be extremely near 1000. the default value of 2000 is typical for rolling over on bed (it depends on the person). this threshold is used for the event of the “posture change” of notification report. 0 2 0 0 2000 from to description 1000 8000 threshold value 7 low threshold for heart rate the low threshold for heart rate will be used to automatically send multilevel report of heart rate if the calculated heart rate goes below this value. 0 2 0 0 60 from to description 0 0 threshold deactivated 1 200 low threshold 9 low threshold for respiratory rate the low threshold for respiratory rate will be used to automatically send multilevel report of respiratory rate if the calculated respiratory rate goes below this value. 0 1 0 0 10 from to description 0 0 threshold deactivated 1 120 low threshold 10 sensor setting sensor sensitivity setting. if parameter 10 is set to 0 (high sensitivity mode), the sensor becomes more vulnerable to environmental noise. 0 1 0 0 1 from to description 0 0 high 1 1 low 11 sensor setting calibration mode setting. if parameter 11 is set to 0 (manual mode), the sensor will use preset values as thresholds for detecting heart rate / respiratory rate. if set to 1 (calibration mode), the sensor will use the calibrated values instead. 0 1 0 0 0 from to description 0 0 manual 1 1 calibration texts