- Name
- S2 On Off Switch
- Brand
- Zooz
- Features
- Feature Values Switch Load Capacity Current
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0704
- Categories
- All Lighting Devices, Lighting Accessories
- Product id
- 0xA001
- S2 classes
- S2_UNAUTHENTICATED
- Device type
- On/Off Power Switch
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 6.71.03
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x027A
- Product type id
- 0xA000
- Long description
- FEATURES: - Manual or Z-Wave on/off control with instant status updates - Simple Direct 3-Way: connect with existing on/off switches in 3-way, 4-way, and 5-way set-ups, no add-on needed (neutral wire required) - Remembers and restores on/off status after power failure - LED indicator signals inclusion, exclusion, reset, and setting changes - Built-in Z-Wave Plus signal repeater to extend network range - Works with LED, CFL, and incandescent bulbs - S2 security protocol and the latest 500 Z-Wave chip for faster and safer wireless communication - Supported by most Z-Wave controllers SPECIFICATIONS: - Model Number: ZEN26 - Z-Wave Signal Frequency: 908.42 MHz - Power: 120 VAC, 60 Hz - Maximum Load: 8 A, 150 W LED/CFL, 600 W incandescent, 1200 W resistive - Range: Up to 100 feet line of sight - Operating Temperature: 32-104° F (0-40° C) - Installation and Use: Indoor only
- Hardware platform
- ZM5202
- Short description
- Use this S2 switch for fast 3-way, 4-way, and 5-way installations with existing on/off switches.
- Product identifier
- ZEN26
- Countries / regions
- United States of America
- Certification number
- ZC10-18116308
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 3
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC_V2
- Value 8 a neutral wire required electric load type value incandescent led firmware updatable value updatable by consumer by rf switch load capacity watts value 600 w (incandescent) / 150 w led's color value white association groups
- Group Number Maximum Nodes Supported End Point ID Description 2
- From to description 0 0 timer disabled 1 32768 seconds 5 on off status after power failure set the on off status for the switch after power failure. 0 1 0 0 2 from to description 0 0 forced to off (regardless of state prior to power outage) 1 1 forced to on (regardless of state prior to power outage) 2 2 remembers and restores on/off status after power failure 1 paddle control choose if you want the upper paddle to turn the light on or turn the light off when tapped. 0 1 0 0 0 from to description 1 1 upper paddle turns the light off, lower paddle turns the light on 0 0 upper paddle turns the light on, lower paddle turns the light off 2 led indicator control choose if you want the led indicator to turn on when the switch (light) is on or off, or if you want it to remain on or off at all times. 0 1 0 0 0 from to description 0 0 led indicator is on when switch is off, led indicator is off when switch is on 1 1 led indicator is on when switch is on, led indicator is off when switch is off 2 2 led indicator is always off 3 3 led indicator is always on texts
- ID Description Value 1
