- Name
- 700 Toggle Dimmer
- Brand
- Zooz
- Features
- Feature Values Neutral Wire Required
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0604
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0xA004
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Multilevel Switch
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Product line
- Line A
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 7.13.6
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x027A
- Product type id
- 0x7000
- Long description
- FEATURES: - Manual or Z-Wave on/off and brightness control - NEW: 700 series Z-Wave chip for better range and faster control - Simple Direct 3-Way: connect with existing on/off switches in 3- way, 4-way, and 5-way set-ups, no add-on needed - Scene control: trigger actions with multi-tap (select hubs only) - Smart bulb mode: disable relay and control the light via Z-Wave - Night light mode: press down when off to turn lights on to 20% - Multi-color LED indicator for easy pairing and troubleshooting - Works with LED and incandescent bulbs (don’t use with tubes) SPECS: - Model Number: ZEN74 VER. 1.0 - Z-Wave Signal Frequency: 908.42 MHz - Power: 120 VAC, 60 Hz - Maximum Load: 100 W LED, 300 W incandescent; DON’T use with fans, switches receptacles, or tube lights - Range: Up to 500 feet line of sight - Operating Temperature: 32-104 F (0-40 C) - Installation and Use: Indoor only
- Hardware platform
- ZGM130
- Short description
- Toggle Style S2 Dimmer with Simple Direct 3-Way Solution
- Product identifier
- ZEN74
- Countries / regions
- United States of America
- Supports smart start
- Yes
- Certification number
- ZC12-21050227
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 3
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4
- Value 100 color value white firmware updatable value updatable by consumer by rf z wave scene type value central scene electric load type value incandescent dimmable led dimmable mlv (magnetic) dimmable elv (magnetic) association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Description 1
- From to description 0 0 timer disabled 1 65535 minutes 1 on/off toggle orientation choose if you want to turn the light on or turn the light off when you toggle up the switch. 2 1 0 2 0 from to description 0 0 toggle up turns the light on, toggle down turns it off (default) 1 1 toggle up turns the light off, toggle down turns it on 2 2 toggle any direction to turn the light on/off (change state). 9 ramp rate control adjust the ramp rate for your dimmer (fade in / fade out effect for on / off operation). values correspond to the number of seconds it take for the dimmer to reach full brightness or turn off when operated manually. 2 1 0 99 1 from to description 1 99 seconds 0 0 instant on/off 5 auto turn on timer use this parameter to enable or disable the auto turn on timer function (the time after which you want the switch to automatically turn on once it has been turned off). 2 4 0 65535 0 from to description 0 0 timer disabled 1 65535 minutes 8 on off status after power failure set the on off status for the switch after power failure. 2 1 0 2 2 from to description 2 2 remembers and restores on/off status after power failure (default) 0 0 forced to off (regardless of state prior to power outage); 1 1 forced to on (regardless of state prior to power outage) 10 minimum brightness set the minimum brightness level (in %) for your dimmer. you won’t be able to dim the light below the set value. 2 1 1 99 1 from to description 1 99 % brightness 11 maximum brightness set the maximum brightness level (in %) for your dimmer. you won’t be able to add brightness to the light beyond the set value. note: if parameter 12 is set to value 0, parameter 11 is automatically disabled. 2 1 0 99 99 from to description 1 99 % brightness 0 0 instant on/off 25 single tap behavior choose what you'd like the dimmer to do when you tap the toggle up once. 2 1 0 3 0 from to description 0 0 the light will turn on to the last brightness level (default) 1 1 the light will turn on to the custom brightness level set in parameter 18 2 2 the light will turn on to the maximum brightness level set in parameter 11 3 3 the light will turn on to full brightness. texts