- Name
- Zooz Z-Wave Contact Sensor
- Brand
- Zooz
- Features
- Feature Values Battery Quantity
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C06
- Categories
- Sensors
- Product id
- 0x1082
- Device type
- Notification Sensor
- Oem version
- HW: 65 FW: 3.61
- Library type
- SLAVE_ROUTING
- Supports nwi
- Yes
- Installer icon
- 0x0C06
- Z wave version
- 6.51.06
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x027A
- Product type id
- 0x0003
- Long description
- PRODUCT FEATURES: - Reliable open/close detection for doors, windows, cabinets, and drawers - Wireless notifications and event triggers (when included to a Z-Wave gateway controller) - Scene inclusion for custom automation scenarios when included to a Z-Wave gateway controller - Low battery alerts - Z-Wave Plus with improved 500 chip for faster and safer wireless communication - Discreet compact design SPECIFICATIONS Model Number: ZSE08 Z-Wave Signal Frequency: 908.42 MHz Power: 1 CR2 battery (included) Power Consumption: 0.13W Operating Temperature: 32 – 104 F Range: Up to 100 feet line of sight Installation and Use: Indoor only Dimensions: 2 ¾” x ¾” Weight: ½ oz
- Hardware platform
- ZM5202
- Short description
- This small and discreet door window sensor is easy to install and quick to join your Z-Wave network. Use it as a simple open / close sensor to notify you of unexpected events or associate the sensor with other Z-Wave devices such as smart lighting to turn lights on when you open the door.
- Product identifier
- ZSE08
- Countries / regions
- United States of America
- Certification number
- ZC10-16085181
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type General purpose
- Value 1 battery type value cr2 color value white sensors value open/closed (binary) association groups
- Group Number Maximum Nodes Supported End Point ID Description 3
- From to description 0 65536 seconds to delay associated device to turn off after sensor changes status 2 trigger action you can choose if your contact sensor turns an associated device on or off when sending the basic set command. use value 0 to turn the associated device off and value 255 to turn it on. adjust brightness level for a z wave dimmer (multilevel switch) by putting in any value between 1 and 99. 0 1 0 0 255 from to description 0 0 associated device will turn off when triggered by the sensor 1 99 brightness level % the associated device will turn on to when triggered by the sensor 255 255 associated device will turn on when triggered by the sensor texts
- ID Description Value 2