- Name
- Zooz Z-Wave Motion and Light Mini Sensor
- Brand
- Zooz
- Features
- Feature Values Battery Quantity
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors
- Product id
- 0x0083
- Device type
- Notification Sensor
- Oem version
- HW: 66 FW: 3.80
- Library type
- SLAVE_ROUTING
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.51.06
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x027A
- Product type id
- 0x0003
- Long description
- PRODUCT FEATURES: - Accurate motion and light level detection - Wireless notifications and low battery alerts (when included to a Z-Wave gateway controller) - Custom automation scenarios based on both light and motion triggers (advanced configuration required) - Adjustable sensitivity levels for motion detection to fit your needs - Ultra small and simple design - Z-Wave Plus with improved 500 chip for faster and safer wireless communication - Flexible and quick installation SPECIFICATIONS: Model Number: ZSE09 Z-Wave Signal Frequency: 908.42 MHz Power: 1 CR123A battery (included) Power Consumption: 0.15W Operating Temperature: 32 – 104 F Motion detection: Up to 20 feet Range: Up to 100 feet line of sight Installation and Use: Indoor only Dimensions: 1.9” x 1.8” Weight: ½ oz
- Hardware platform
- ZM5202
- Short description
- Use this compact Z-Wave Plus sensor to monitor motion and light level. Schedule scenes and events based on sensor readings and receive notifications when activity is detected.
- Product identifier
- ZSE09
- Countries / regions
- United States of America
- Certification number
- ZC10-16085198
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 3
- Supports explorer frames
- Yes
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type General purpose
- Value 1 battery type value cr123 a color value white sensors value motion/no motion (binary) luminance association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 255 255 associated device will turn on when triggered by the sensor 1 99 brightness level (percentage) the associated device will turn on to when triggered by the sensor 4 motion detection use this parameter to enable and disable motion detection on your mini sensor. 0 1 0 0 255 from to description 255 255 motion detection enabled 5 light trigger level set your light sensor as a secondary trigger for associated devices. if light level in a room falls beyond the set point and motion is detected, the mini sensor will send basic set command to associated devices to turn on. the number entered as the value corresponds to the number of lux. so if 100 is entered by default, the associated device will turn on if light level last reported by the sensor is under 100 lux and if motion has been detected by your mini sensor. values: 0 – 1000 (lux). 100 (lux) – default setting. 0 2 0 0 100 from to description 0 1000 light level change (in lux) to set off light trigger 6 motion trigger interval adjust the time when motion is reported again after initial trigger. the number entered as the value corresponds to the number of seconds. so if 8 is entered by default, the mini sensor will report motion for 8 seconds after it first detects movement. the value set for this parameter can not be greater than value set in parameter 2. note: small interval will increase activity and decrease battery life. 0 1 0 0 8 from to description 1 8 number of seconds for motion trigger interval 8 light trigger use this parameter to enable and disable the light sensor as secondary trigger. if this feature is enabled, the mini sensor will activate associated devices based on motion and light level set in parameter 5. 0 1 0 0 0 from to description 0 0 light trigger disabled 255 255 light trigger enabled 10 led notifications use this parameter to turn led notifications on or off for motion detection. 0 1 0 0 1 from to description 0 0 led disabled 1 1 led enabled 7 light polling interval decide how often you want the mini sensor to report light level to the controller and associated devices. the number entered as the value corresponds to the number of seconds. so if 180 is entered by default, the mini sensor will report light level values every 3 minutes. the value set for this parameter can not be greater than the wake up interval. note: small interval will increase activity and decrease battery life. 0 2 0 0 180 from to description 60 360000 light polling interval in seconds 9 light report choose light level change to be reported by the mini sensor to the controller. the number entered as the value corresponds to the number of lux. so if 100 is entered by default, the sensor will report any change of 100 lux or more. 0 2 0 0 100 from to description 0 255 light level change (in lux) to be reported by the sensor to the controller texts
