- Name
- Zooz Z-Wave Plus Water Sensor
- Brand
- Zooz
- Features
- Feature Values Sensors
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C05
- Categories
- Sensors
- Product id
- 0x0085
- Device type
- Notification Sensor
- Oem version
- HW: 48 FW: 2.40
- Library type
- SLAVE_ROUTING
- Supports nwi
- Yes
- Installer icon
- 0x0C05
- Z wave version
- 6.51.06
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x027A
- Product type id
- 0x0003
- Long description
- Product features: - Reliable water and leak detection - Wireless notifications and event triggers (when included to a Z-Wave gateway controller) - Built-in audio and visual alarms - Low battery alerts - Z-Wave Plus with improved 500 chip for faster and safer wireless communication - Flexible installation with 2 mounting options Specifications: Model Number: ZSE30 Z-Wave Signal Frequency: 908.42 MHz Power: 1 CR2 battery (included) Power Consumption: 0.13W Operating Temperature: 32 – 104 F Range: Up to 100 feet line of sight Installation and Use: Indoor only Dimensions: 2.5” x 0.9” Weight: 2 oz
- Hardware platform
- ZM5202
- Short description
- The Zooz Water sensor detects leaks and sends notifications to your Z-Wave controller so you can prevent water damage in monitored areas.
- Product identifier
- ZSE30
- Countries / regions
- United States of America
- Certification number
- ZC10-17025433
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 3
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type Moisture
- Value moisture color value white battery type value cr2 battery quantity value 1 association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 10 255 seconds 5 enable / disable audio alarm enable or disable the audio alarm by adjusting these parameter settings. the visual alarm will not be disabled and the led indicator will always light up each time water is detected. 0 1 0 0 1 from to description 0 0 alarm disabled 1 1 alarm enabled 7 trigger action you can choose if your water sensor turns an associated device on or off when sending the basic set command. use value 0 to turn the associated device off and value 255 to turn it on. adjust brightness level for a z wave dimmer (multilevel switch) by putting in any value between 1 and 99. 0 1 0 0 255 from to description 0 0 off 1 99 % of light 255 255 on 1 total alarm duration use this parameter to set the total duration of audio and visual alarm each time water is detected. if the value is set to 0, the alarm will continue until water is no longer detected. use parameters 2 – 4 to customize the alarm. 0 1 0 0 120 from to description 0 0 alarm will continue until water is no longer detected 1 255 minutes 2 audio alarm: beep interval set the beeping frequency for the sensor’s audio alarm. the interval between beeps can be as low as 1 minute. 0 1 0 0 1 from to description 1 255 minutes 4 audio alarm: beep duration adjust the duration of the beeps the alarm will sound after a leak is detected and the first “long” beep is produced. 0 1 0 0 5 from to description 5 255 seconds 6 enable / disable water detection enable or disable water detection for the sensor by adjusting these parameter settings. 0 1 0 0 1 from to description 0 0 sensor disabled 1 1 sensor enabled texts
