- Name
- Water Sensor
- Brand
- Zooz
- Features
- Feature Values Battery Quantity
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C05
- Categories
- Sensors
- Product id
- 0xE002
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Product line
- Line A
- Supports nwi
- Yes
- Installer icon
- 0x0C05
- Z wave version
- 7.13.9
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x027A
- Product type id
- 0x7000
- Long description
- PRODUCT HIGHLIGHTS: - Quick and reliable water leak alerts sent to your Z-Wave™ hub - NEW 700 series chip for faster communication and more battery life than ever - Extra small to fit anywhere - Powered by a long-lasting single coin battery - The latest S2 security and SmartStart for secure set-up - Supports OTA firmware updates PRODUCT SPECS: - Model Number: ZSE42 - Power: 1 x CR2032 battery - Operating Temperature: 32° – 104° F - Dimensions: 1.9” x 1” x 0.3” - Range: Up to 130 feet line of sight - Installation and Use: Indoor or outdoor under eve (can’t be exposed to direct rainfall or sun, a little splash is OK)
- Hardware platform
- ZGM130
- Short description
- The 700 Series Z-Wave Plus™ XS Water Leak Sensor was designed to detect and report leaks to your Z-Wave™ hub reliably and quickly so you can prevent potential water damage.
- Product identifier
- ZSE42
- Countries / regions
- United States of America
- Supports smart start
- Yes
- Certification number
- ZC12-21080294
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4
- Supported notification types
- Notification Type Event / State Water Alarm
- Value 1 battery type value cr2032 color value blue firmware updatable value updatable by consumer by rf association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Description 2
- From to description 0 0 led indicator doesn't light up when water is detected 1 1 led indicator lights up when water is detected 2 alarm clear delay set the delay for a "dry" report to be sent to the hub when water is no longer detected. 2 4 0 3600 0 from to description 0 3600 seconds 3 battery reporting threshold set the battery reporting threshold. 2 1 1 50 10 from to description 1 50 % 5 group 2 on/off basic set commands choose when you'd like the sensor to send on/off basic set commands to group 2 once the water detection status changes. 2 1 0 2 1 from to description 0 0 doesn't send basic set commands 1 1 sends 0x ff (on) when water is detected and 0x00 (off) when water is no longer detected 2 2 sends 0x00 (off) when water is detected and 0x ff (on) when water is no longer detected texts
- ID Description Value 8