- Name
- LED Bulb
- Brand
- Aeotec
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x0062
- Device type
- Light Dimmer Switch
- Oem version
- HW: 98 FW: 1.06
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.51.09
- Frequency plans
- HK: 919.80MHz, 919.80MHz
- Manufacturer id
- 0x0086
- Product type id
- 0x0303
- Long description
- Aeotec LED Bulb is a low-cost Z-Wave LED module which allows control (on/off/dim) with the use of Z-Wave. It’s a bulb has a Smart RGB LED, which can be used to add colour to your home. The bulb has 5 main colour channels available for you to adjust: Red, Green, Blue, Warm White and Cold White. You can configure its colour according to your favour. The LED Bulb is also a security Z-Wave device and supports the Over The Air (OTA) feature for the product’s firmware upgrade.
- Hardware platform
- ZM5101
- Short description
- Aeotec LED Bulb is a low-cost Z-Wave LED module which allows control (on/off/dim) with the use of Z-Wave.
- Product identifier
- ZW098-D55
- Countries / regions
- Hong Kong
- Certification number
- ZC10-17075675
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 112
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Value updatable by consumer by rf switch type value toggle z wave scene type value scene association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 parabolic curve mode 1 1 index curve mode 2 2 (parabolic + index)/2 mode 3 3 linear mode 252 enable/disable lock configuration enable/disable to lock configuration parameters. 0 1 0 0 0 from to description 0 0 disable 1 1 enable 255 reset the bulb reset the bulb to factory default. 0 4 0 0 0 from to description 0 0 reset all configuration parameters to factory default settings 1431655765 1431655765 reset the bulb to factory default. 80 to set whcih notification can be sent to the associated devices (group 1) when the state of led bulb is changed. to set whcih notification can be sent to the associated devices (group 1) when the state of led bulb is changed. 0 1 0 0 1 from to description 0 0 nothing 1 1 hail cc 2 2 basic cc report. texts
- ID Description Value 2
