- Name
- LED Bulb 6:Multi-Colour
- Brand
- Aeotec
- Features
- Feature Values Color
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x0002
- Device type
- Light Dimmer Switch
- Oem version
- HW: 1 FW: 1.19
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.51.09
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0371
- Product type id
- 0x0003
- Long description
- ✓ Standard form factor and appearance of the light bulb with 800 lm output ✓ RGBW: dimmable from 5% to 100%, tunable from 1800K to 6500K, and 16 million colors ✓ Possible to be included in groups, scenes, or schedules ✓ Suitable for indoor lighting: Corridors, Bedroom, Living Room, etc.
- Hardware platform
- ZM5101
- Short description
- RGBW: dimmable from 5% to 100%, tunable from 1800K to 6500K, and 16 million colors
- Product identifier
- ZWA002-C
- Countries / regions
- European Union
- Certification number
- ZC10-18046097
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 80
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Value white firmware updatable value updatable by consumer by rf switch load capacity watts value 10 association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 nothing 1 1 send basic report to associated devices when the state of the led bulb is changed 82 the user can configure the parameter to adjust the color component cold white. the user can configure the parameter to adjust the color component cold white. value rang = cold white (0x1388 (5000k) ~ 0x1964 (6500k)) 0 2 0 0 6500 from to description 5000 6500 value rang = cold white (0x1388 (5000k) ~ 0x1964 (6500k)) 2 enable/disable strobe over custom color. enable/disable strobe over custom color. 0 = disable. 1 = enable. others = ignore. 0 1 0 0 0 from to description 0 0 disable strobe over custom color. 1 1 enable strobe over custom color. 3 set the rate of change to next color in custom mode. set the rate of change to next color in custom mode. value1 ~ value4: value range = 5 8640000 (50 86400000ms) 0 1 0 0 50 from to description 5 8640000 set the specified rate of change to next color in custom mode. 4 set color that led bulb blinks in (blink mode) set color that led bulb blinks in (blink mode) 128 to 127 corresponds with the unsigned values 0 to 255 or hex values 0x00 to 0x ff 0 1 0 0 1 from to description 128 127 set color that led bulb blinks in (blink mode) 81 the user can configure the parameter to adjust the color component warm white. the user can configure the parameter to adjust the color component warm white. value range =warm white(0x0 a8 c(2700k) ~ 0x1387 (4999k)) 0 2 0 0 2700 from to description 2700 4999 value range =warm white(0x0 a8 c(2700k) ~ 0x1387 (4999k)) 1 user custom mode for led animations. user custom mode for led animations. 0 = disable custom mode. 1= blink colors in order mode. 2=randomized blink color mode 0 1 0 0 0 from to description 1 1 blink colors in order mode. 0 0 disable custom mode 2 2 randomized blink color mode texts
