- Name
- PIR Motion Sensor
- Brand
- Axis Communications
- Features
- Feature Values Battery Quantity
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors
- Product id
- 0x0001
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 1.00:00.05
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.71.01
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0364
- Product type id
- 0x0002
- Long description
- AXIS T8341 PIR Motion Sensor is a wireless sensor which provides motion detection both day and night. With its support for wireless input/output connectivity, the PIR motion sensor can communicate wirelessly with AXIS M5065 PTZ Network camera or other connected Z-Wave Plus® controllers, creating a small security solution with less cabling. Thanks to its integrated wireless I/O connectivity, AXIS T8341 enables flexible installation as the sensor can easily be moved and adapted to your needs.
- Hardware platform
- SD3502
- Short description
- AXIS T8341 PIR Motion Sensor is a wireless sensor which provides motion detection both day and night.
- Product identifier
- T8341
- Countries / regions
- United States of America
- Certification number
- ZC10-17115880
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported notification types
- Notification Type Event / State Home Security
- Value 1 battery type value cr123 a color value white firmware updatable value updatable by consumer via internet supported notification types value home security association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 99 level 3 sensitivity level in order to provide a best efficiency of the detector, it is recommended to test the detector with movements from a farthest end of the coverage area at first time of use. if movements cannot be detected sensitively, simply adjust the sensitivity level with configuration parameter #3. this parameter can be configured with the value of 1 through 10, where 1 means low sensitivity and 10 means highest sensitivity. 0 1 0 0 6 from to description 1 10 level 4 re trigger interval the configuration parameter that can be used to adjust the interval of being re triggered after the detector has been triggered as configuration parameter #4. no response will be made during this interval if a movement is presented. the time interval can be set between 5 secs to 3600 secs. 0 2 0 0 180 from to description 5 3600 seconds texts
- ID Description Value 1
