- Name
- PIR Motion Sensor
- Brand
- Axis Communications
- Features
- Feature Values Supported Notification Types
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors
- Product id
- 0x0001
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 1.00:00.05
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.71.01
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0364
- Product type id
- 0x0002
- Long description
- AXIS T8341-EUR PIR Motion Sensor is a wireless sensor which provides motion detection both day and night. With its support for wireless input/output connectivity, the PIR motion sensor can communicate wirelessly with AXIS M5065 PTZ Network camera or other connected Z-Wave Plus® controllers, creating a small security solution with less cabling. Thanks to its integrated wireless I/O connectivity, AXIS T8341-EUR enables flexible installation as the sensor can easily be moved and adapted to your needs.
- Hardware platform
- SD3502
- Short description
- AXIS T8341-EUR PIR Motion Sensor is a wireless sensor which provides motion detection both day and night.
- Product identifier
- T8341-EUR
- Countries / regions
- European Union
- Certification number
- ZC10-18096247
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 4
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported notification types
- Notification Type Event / State Home Security
- Value home security battery quantity value 1 battery type value cr123 a color value white firmware updatable value updatable by consumer via internet association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 5 3600 re trigger interval can be set 5~3600 seconds. 1 basic set level when a basic set command is sent and contains a value, the receiver will process it. for example, a lamp module would receive a basic set command which determines the dim level. 0 1 0 0 99 from to description 1 99 basic set level can be set 1~99. 3 sensitivity level for optimal efficiency, it is recommended to test the detector’s response to movements from the farthest end of the coverage area when you use it for the first time. if movements cannot be detected accurately, simply adjust the sensitivity level with the configuration parameter #3. this parameter can be configured with a value from 1 to 10, where 1 means low sensitivity and 10 means highest sensitivity. 0 1 0 0 6 from to description 1 10 sensitivity level can be set 1~10. texts
- ID Description Value 2
