- Name
- In-Wall Dimmer ON/OFF Switch
- Brand
- Dragon Tech Industrial, Ltd.
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x3034
- Device type
- Light Dimmer Switch
- Oem version
- FF
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Z wave version
- 6.51.06
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0184
- Product type id
- 0x4447
- Long description
- - Works with incandescent and dimmable florescent (CFL) or LED lighting - ON/OFF status and location LED indicator - Fits into standard single or multiple gang junction box - Keypad can be replaced manually to match color with other wall switches - Over-The-Air firmware upgrade available with compatible gateway, Z-Wave static controller, or PC and software - Internal resettable fuse to protect from surge current - Manual reset capability - Support Central Scene
- Hardware platform
- ZM5202
- Short description
- WD-100 In Wall Dimmer Switch - Replaces existing wall switch - Remotely or manually turns On, Off, or dim lights - Fits standard wall plates - Z-Wave Plus certified with 500 series chipset - Functions as a Z-Wave signal repeater - Support Central Scene
- Association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- Product identifier
- WD-100
- Countries / regions
- United States of America
- Certification number
- ZC10-16020014
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 4
- Supports explorer frames
- Yes
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
- From to description 0 0 the connected light will turn on by pressing the top side of the rocker switch and turn off by pressing the bottom side. 1 1 the connected light will turn off by pressing the top side of the rocker switch and turn on by pressing the bottom side. 9 indicates the number of levels the time interval of brightness change between dimming up and down can be adjusted length: 1 byte valid values: 1 99 (default = 1), indicates the number of levels the lighting will change when the timer runs out. 0 1 0 0 1 from to description 1 99 indicates the number of levels the lighting will change when the timer runs out. texts
- ID Description Value 1
%20(2).jpg)
%20(2).jpg)
.jpg)
.jpg)