- Name
- S2 In-wall Smart ON/OFF Switch
- Brand
- EVA LOGIK
- Features
- Feature Values Color
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0704
- Categories
- All Lighting Devices, On/Off Switches/Devices
- Product id
- 0xAA01
- S2 classes
- S2_UNAUTHENTICATED
- Device type
- On/Off Power Switch
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 6.81.03
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0312
- Product type id
- 0xAA00
- Long description
- This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. Each module is designed to act as a repeater,which will re-transmit a radio frequency (RF) signal by routing the signal around obstacles and radio dead spots to ensure that the signal is received at its intended destination. ZW30 is a security enabled Z-Wave plus device. A security Enabled Z-Wave Plus Controller must be used in order to fully utilize the product.
- Hardware platform
- ZM5202
- Short description
- This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
- Product identifier
- ZW30
- Countries / regions
- United States of America
- Certification number
- ZC10-19086699
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC_V2
- Value white firmware updatable value updatable by consumer by rf switch load capacity current value 15 a switch type value decorator paddle push z wave scene type value scene association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 up button on,down button off 1 1 up button off,down button on 2 2 up button on/off,down button on/off 2 status led configuration status led configuration 0 1 0 0 0 from to description 1 1 output and the led are in the same state. 2 2 led always off 3 3 led always on 0 0 output and the led are in the different state. 4 auto turn off timer auto turn off timer 0 4 0 0 60 from to description 1 65535 auto turn off timer 5 enable auto turn on timer enable auto turn on timer 0 1 0 0 0 from to description 0 0 timer disabled 1 1 timer enabled 6 auto turn on timer auto turn on timer 0 4 0 0 60 from to description 1 65535 auto turn on timer 8 restores state after power failure restores state after power failure 0 1 0 0 2 from to description 0 0 output off 1 1 output on 2 2 the state before a power outage 3 enable auto turn off timer enable auto turn off timer 0 1 0 0 0 from to description 0 0 timer disabled 1 1 timer enabled 9 enable or disable local control enable or disable local control 0 1 0 0 1 from to description 0 0 disable 1 1 enable texts
- ID Description Value 2
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
