- Name
- S2 In-wall Smart Dimmer switch
- Brand
- EVA LOGIK
- Features
- Feature Values Color
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0604
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0xAA02
- S2 classes
- S2_UNAUTHENTICATED
- Device type
- Light Dimmer Switch
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.81.03
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0312
- Product type id
- 0xA000
- Long description
- This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.Each module is designed to act as a repeater,which will re-transmit a radio frequency (RF) signal by routing the signal ,around obstacles and radio dead spots to ensure that the signal is received at its intended destination.
- Hardware platform
- ZM5202
- Short description
- This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
- Product identifier
- ZW31
- Countries / regions
- United States of America
- Certification number
- ZC10-19086704
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC_V2
- Value white electric load type value incandescent dimmable led firmware updatable value updatable by consumer by rf switch load capacity watts value 500 w switch type value toggle z wave scene type value scene association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 up button on,down button off 1 1 up button off,down button on 2 2 up button: on/off down button: on/off 2 status led configuration status led configuration 0 1 0 0 0 from to description 0 0 output and the led are in the different state. 1 1 output and the led are in the same state. 2 2 always off 3 3 always on 3 enable auto turn off timer enable auto turn off timer 0 1 0 0 0 from to description 0 0 auto turn off timer disabled 1 1 auto turn off timer enabled 4 count down configuration count down configuration(turn off the output by time） 0 4 0 0 60 from to description 1 65535 count down configuration(turn off the output by time） 5 enable auto turn on timer enable auto turn on timer 0 1 0 0 0 from to description 0 0 auto turn on timer disabled 1 1 auto turn on timer enabled 6 count down configuration count down configuration(turn on the output by time） 0 4 0 0 60 from to description 1 65535 count down configuration(turn on the output by time） 8 restores state after power failure restores state after power failure 0 1 0 0 2 from to description 0 0 output off. 1 1 output on 2 2 the state before a power outage. 9 dimmer speed parameter （local button） dimmer speed parameter （local button） 0 1 0 0 1 from to description 1 99 from 0x63 to 0x00 or from 0x00 to 0x63 need xxs 10 multilevel minimum value can be set multilevel minimum value can be set（the minimum luminance value of the dimming）（local button） 0 1 0 0 1 from to description 0 99 multilevel minimum value can be set（the minimum luminance value of the dimming）（local button） 11 multilevel maxmum value can be set multilevel maxmum value can be set（the maxmum luminance value of the dimming）（local button） 0 1 0 0 0 from to description 0 99 multilevel maxmum value can be set（the maxmum luminance value of the dimming）（local button） texts
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
