- Name
- MOTION DETECTOR
- Brand
- Everspring
- Features
- Feature Values Battery Type
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors
- Product id
- 0x0006
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 1.00:00.05
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.71.01
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0060
- Product type id
- 0x0001
- Long description
- This presence detector using PIR (passive infrared receiver) detects the presence of a person in a room. The units compatible with S2 security, send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device. The sensor is a battery-powered device, which is in sleeping mode unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping mode. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The unit offers a tampering control and sends an alarm message when tampered.
- Hardware platform
- SD3502
- Short description
- The Motion Detector is designed with two detecting sensors, Passive Infra-Red (PIR) sensor and light sensor, in order to fulfill the purpose of security and home automation.
- Product identifier
- SP817-1
- Countries / regions
- European Union
- Certification number
- ZC10-18066147
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported notification types
- Notification Type Event / State Home Security
- Value cr123 a supported notification types value home security battery quantity value 1 color value white association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 99 basic set level 3 sensitivity level in order to provide a best efficiency of the detector, it is recommended to test the detector with movements from a farthest end of the coverage area at first time of use. if movements cannot be detected sensitively, simply adjust the sensitivity level with configuration parameter #3. this parameter can be configured with the value of 1 through 10, where 1 means low sensitivity and 10 means highest sensitivity. 0 1 0 0 6 from to description 1 10 sensitivity level 4 re trigger interval the configuration parameter that can be used to adjust the interval of being re triggered after the detector has been triggered as configuration parameter #4. no response will be made during this interval if a movement is presented. the time interval can be set between 5 secs to 3600 secs. 0 2 0 0 180 from to description 5 3600 re trigger interval texts
- ID Description Value 1
