- Name
- Flood & Temperature Sensor
- Brand
- FortrezZ LLC
- Features
- Feature Values Battery Quantity
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C05
- Categories
- Sensors
- Product id
- 0x020A
- Device type
- Notification Sensor
- Oem version
- HW: 5 FW: 2.10
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0C05
- Z wave version
- 6.51.09
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0084
- Product type id
- 0x00A3
- Long description
- Gain the peace of mind and the protection you expect. Water damages are caused by leaking pipes, corroded water heaters, water storage tanks, fixtures in bathrooms, laundry rooms, refrigerator drip pans etc. Place this sensor in areas near water consuming appliances and drains. If a leak occurs, water will puddle and wet the sensor, triggering an alarm. The Sensor will notify the Z-wave controller that a flood has been detected. Paired with our Water Valve, these units will automatically signal the water to shut-off, eliminating any further damage from occurring.
- Hardware platform
- ZM5202
- Short description
- Water damages are caused by leaking pipes and faulty appliances. Place sensors in areas near water consuming appliances. If a leak occurs, water will puddle and wet the sensor, triggering an alarm.
- Product identifier
- FTS05P
- Countries / regions
- United States of America
- Certification number
- ZC10-17065641
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Supported notification types
- Notification Type Event / State Heat Alarm
- Value 2 battery type value aa alkaline color value black firmware updatable value updatable by consumer by rf sensors value air temperature moisture humidity freeze water temperature soil temperature supported notification types value heat alarm water alarm power management system association groups
- Group Number Maximum Nodes Supported End Point ID Description 2
- From to description 247 70 9 deg to 70 deg c 1 temperature low threshold use this to change the low temperature alarm threshold. set the range between 10 and 69 deg c 0 1 0 0 4 from to description 246 69 10 deg to 69 deg c 4 water alarm association mode use this to send basic set on or basic set off when an alarm is detected. '240' is basic set on (default). use value of '0' for sending basic set off when alarm detected. 0 1 0 0 240 from to description 240 0 240 or 0 3 normally wet vs normally dry default is set as a normally dry sensor. use this to switch to normally wet sensor. 0 1 0 0 0 from to description 0 240 0 or 240 texts
- ID Description Value 4
