- Name
- Flow Meter
- Brand
- FortrezZ LLC
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0D01
- Categories
- Water Valves & Irrigation
- Product id
- 0x0110
- Device type
- Multilevel Sensor
- Oem version
- HW: 5 FW: 1.16
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0D01
- Z wave version
- 6.51.06
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0084
- Product type id
- 0x0473
- Long description
- Information is power! With flow meter, you have the power to automate and manage water consumption and leak detection in your home or building. This is an integral part to a complete water management solution! Flow meter tracks water usage and reports in gallons. Track your households water usage! Drill into reports and find out where your peak consumption is and make changes to reduce your water bills. Flow meter also tells you if water is flowing or not. It knows if the flow is small (like a toilet running) or large (a garden hose left on). This can be used to detect leaks, faulty appliances, or fixtures left on. To add to it's capabilities, flow meter checks the temperature of the nearby surroundings to make sure the pipes don't freeze by sending you temperature reports. There's also a backup battery just in case power is interrupted. You wont have to worry about lost data or a lack of leak monitoring. Plumbed on the water main, flow meter is sure to be a valuable part of your home automation & leak prevention system.
- Hardware platform
- ZM5202
- Short description
- Take Control of your water! Flow meter does just that by tracking water consumption and flow. Get reports with your daily, weekly, and monthly consumption data. Flow meter sends notifications if water is flowing or not, and detects leaks or unwanted use.
- Association groups
- Group Number Maximum Nodes Supported End Point ID Description 2
- Product identifier
- FMI
- Countries / regions
- United States of America
- Certification number
- ZC10-16045038
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 5
- Supports explorer frames
- Yes
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- From to description 0 65535 0 to 65535 (0 xffff) 0 0 6 multi level sensor report vs notification toggle use this to toggle between notification command class & multi level sensor report. by default, fmi uses notification command class (water flow). set a non zero value to disable notification command class and enable the multi level sensor report instead. multi level sensor report will send (0, 128, or 255). notification command class will send (water flow v7 w/ parm 1,2, 3) 0 1 0 0 1 from to description 0 255 0 = notification, 1= mls report 0 0 2 temperature high threshold set threshold for high temperature trigger. default set to 70⁰c (158⁰f) 0 1 0 0 70 from to description 247 70 9 to 70⁰c 0 0 3 meter count meter count reset back to 0 or set value. 0 1 0 0 0 from to description 0 2147483647 0 to 2147483647 count rolls over at 99,999,999 0 0 4 meter reporting interval meter report interval, while liquid flow is detected (in increments of 10 seconds). if 0 is set, then no continuous reporting during liquid flow; in this case, a report is sent every 10 hours whether or not flow is detected. default value of 6 represents 60 seconds (1 minute). 0 1 0 0 6 from to description 0 255 0 to 2,550 seconds (0 xff) 0 0 1 temperature low threshold set threshold for low temperature trigger. default set to 4⁰c (39⁰f) 0 1 0 0 4 from to description 246 69 10 to 69⁰c 0 0 texts
- ID Description Value 1
