- Name
- Custos Ball Valve Servo
- Brand
- Custos
- Features
- Feature Values Outdoor Use
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x1500
- Categories
- Water Valves & Irrigation
- Product id
- 0x000A
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Binary Switch
- Oem version
- HW: 3 FW: 3.03
- Library type
- SLAVE_ENHANCED_232
- Product line
- BVS
- Supports nwi
- Yes
- Installer icon
- 0x1500
- Z wave version
- 7.13.2
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0270
- Product type id
- 0x0101
- Long description
- With patented mechanic design, Custos BVS can be installed by yourself on existing valve of your water main within 20 seconds without any tool, to provide fully automated shutoff against flooding. A super strong and advance mechanic combined with smart software algorithm allows the BVS to deal with even the toughest valve without compromising the integrity of your valve over the time. Key features: 1. Hassle free bare hand install in 20 seconds 2. Outdoor proof, can be deployed on water main outside your house 3. Build-in local leak detection probe, can work standalone 4. Elbow friendly, adjustable clamp span can fit in smallest space or oversized valve up to 1.25 inches 5. Smart adaptive torque control and self calibration, real plug and play without any hassle for adjustment or calibration.
- Hardware platform
- ZGM130
- Short description
- Custos Ball Valve Servo (BVS) is the most advance retrofit valve controller for real DIY
- Product identifier
- BVSZWE
- Countries / regions
- European Union
- Supports smart start
- Yes
- Certification number
- ZC12-21020179
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 17
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Supported notification types
- Notification Type Event / State Heat Alarm
- Value decorator paddle push association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile Description 1
- From to description 0 0 disable: 0x00 = does not let water run through, 0x ff = let water run through. based on configuration cc setting 0x12 & 0x13 1 0 enable: 0x00 = let water run through, 0x ff = does not let water run through based on configuration cc setting 0x12 & 0x13 41 freeze recover value configure freeze recover report value 2 2 0 511 292 from to description 0 255 from 0°c to 255°c 256 511 from 0°f to 255°f 42 freeze detection valve control enable / disable valve control during freeze when water leak is detected “detected by built in temperature sensor. refer to configuration cc parameter 0x28 (41) & 0x29 (42) 3 1 0 1 1 from to description 0 0 ignore / allowed to control water valve during freeze detection 1 0 forbidden to control water valve during freeze detection 43 association group 5 freeze trigger configure association group 5 freeze detection trigger basic set value 3 1 0 2 0 from to description 0 0 disable basic set (send nothing) 1 0 basic set on (0x ff) 2 0 basic set off (0x00) 44 association group 5 freeze cancel configure association group 5 freeze detection cancellation basic set value 3 1 0 2 0 from to description 0 0 disable basic set (send nothing) 1 0 basic set on (0x ff) 2 0 basic set off (0x00) 49 association group 3 water leak trigger configure association group 3 water leak trigger basic set value 3 1 0 2 1 from to description 0 0 disable basic set (send nothing) 1 0 basic set on (0x ff) 2 0 basic set off (0x00) 50 association group 3 water leak cancel configure association group water leak cancellation basic set value 3 1 0 2 0 from to description 1 0 basic set on (0x ff) 0 0 disable basic set (send nothing) 2 0 basic set off (0x00) 51 water leak detection valve control disable / enable valve control when water leak detected 3 1 0 1 1 from to description 0 0 disable to control water valve when water leak is detected 1 0 enable to control water valve when water leak is detected 65 buzzer enable / disable built in buzzer sound 3 1 0 1 1 from to description 0 0 disable buzzer 1 0 enable buzzer 66 led brightness level configure built in led brightness level 2 1 0 99 80 from to description 0 99 set brightness level from 0% ~ 99% 67 touch keylock protection disable / enable touch keylock protection 3 1 0 1 0 from to description 0 0 disable keylock protection 1 0 enable keylock protection texts
